PM820, PM822, and PM825 Cold Planer Caterpillar


Daily Inspection

Usage:

PM825 3C6


注意事項

機器上聚積潤滑脂和機油有引起火災的危險。 每隔1000小時或每次有大量機油潑灑在機器上時,請使用蒸氣清潔或高壓水清除這些殘渣。


請參閱保養手冊以瞭解詳細的步驟。 請參閱保養週期計劃表以瞭解完整的計劃保養清單。

------ 警告! ------

柴油引擎排放的廢氣包含可能有害健康的燃燒產物

確保在通風良好的地方操作引擎,如果位於封閉空間之內,請將廢氣排到空間外。


有兩種方法可固定機器:

  • 將機器升起至最大高度。 安裝維修支撐架。

  • 降下機器,直到轉子位於地面為止。

偏好設定: 請參閱操作及保養手冊, "維修支撐架 (支柱鎖)"。

附註這兩種方法均可防止機器在維修時移動。

如欲使機器能達到最長的使用壽命,務必對機器進行巡覽檢查。 請先進行巡覽檢查,再登上機器。 請先進行巡覽檢查,再起動引擎。

查看機器四周和下方,確定是否有鬆動的螺栓、垃圾、機油洩漏、冷卻液洩漏、破損或磨損零件等項目。 檢查附件的狀況。 檢查履帶與液壓組件的狀況。 進行任何必要的維修。

Caterpillar Information System:

PM620 and PM622 Cold Planer Declaration of Conformity
PM820, PM822, and PM825 Cold Planer Plate Locations and Film Locations
PM620 and PM622 Cold Planer Specifications
PM620 and PM622 Cold Planer Sound Information and Vibration Information
C8.7 Marine Engine System Pressure Release
PM820, PM822, and PM825 Cold Planer Restricted Visibility
2014/08/01 New Engine Software Is Used on Certain C32 Generator Sets {1901, 1920}
C8.7 Marine Engine General Hazard Information
PM820, PM822, and PM825 Cold Planer Fire Extinguisher Location
XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Remove and Install
C11 and C13 Engines Fuel Filter Base
C27 and C32 Engines for Caterpillar Built Machines Fuel Transfer Pump
PM820, PM822, and PM825 Cold Planer Seat
XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Disassemble
XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Assemble
C3.4B Engines for Caterpillar Built Machines Fuel Injection Lines
TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Assemble
Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606} Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606}
C3.4B Engines for Caterpillar Built Machines Valve Mechanism Cover
C8.7 Marine Engine Belts - Replace
C3.4B Engines for Caterpillar Built Machines Nitrogen Oxide Sensor
Radiator Guard Coolant Tube Contact on Certain PM3516 Power Modules{1353, 1380} Radiator Guard Coolant Tube Contact on Certain PM3516 Power Modules{1353, 1380}
PM820, PM822, and PM825 Cold Planer Battery Disconnect Switch
PM620 and PM622 Cold Planer Backup Alarm
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.