Air Cleaner - Remove and Install
- Isolate the electric power generation set. Refer to Operation and Maintenance Manual, "Generator Isolating for Maintenance" for the correct procedure.
Show/hide table
Illustration 1 g03681989 - Open access door (1).
Show/hide table
Illustration 2 g03682021 - Unlatch clamp (2) and remove retaining ring (3). Remove cover (4) and filter element (5).
Show/hide table
Illustration 3 g03681990 - From inside of the container, disconnect harness assembly (7). Loosen clamps (6).
Show/hide table
Illustration 4 g03681991 - Remove bolts (9) and remove air cleaner housing (8).
- Repeat Step 2 through Step 5 for the opposite side.
- Install air cleaner housing (8) in the reverse order of removal.
Caterpillar Information System:
Cat® Digital Voltage Regulator Electrical
793F and 797F Off-Highway Trucks Braking System Parking Brake Pressure Is High
C4.4 Engines for Caterpillar Built Machines Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C4.4 Engines for Caterpillar Built Machines Accessory Drive - Remove and Install - Accessory Drive SAE "B"
793F and 797F Off-Highway Trucks Braking System Parking Brake Accumulator Is Frequently Charging
793F and 797F Off-Highway Trucks Braking System Service Brake Pressure Is Low
793F and 797F Off-Highway Trucks Braking System Service Brake Pressure Is High
793F and 797F Off-Highway Trucks Braking System Service Brake Accumulator Is Frequently Charging
793F and 797F Off-Highway Trucks Braking System Brake System
UPS 750 Uninterruptible Power Supply Additional UPS Concepts
C4.4 Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install - Engines With an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
Fuel Pressure Gauge Reads Incorrect Suspect Parameter Number (SPN) {7451, 7456} Fuel Pressure Gauge Reads Incorrect Suspect Parameter Number (SPN) {7451, 7456}
Cat® Digital Voltage Regulator Dimensions
3516C and C175-16 Engines Selective Catalytic Reduction SCR Catalyst Sulfation Is Excessive
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
793F and 797F Off-Highway Trucks Braking System Parking Brake Pressure Is Low
793F and 797F Off-Highway Trucks Braking System Hoist Pilot Pressure Is High
793F and 797F Off-Highway Trucks Braking System Hoist Pilot Pressure Is Low
793F and 797F Off-Highway Trucks Braking System Service Brake Cooling Temperature Is High
330D2 Excavators Machine System Specifications Track Roller (Single Flange)
326F Excavator Machine System Specifications Track Roller (Single Flange)
C4.4 and C7.1 Engines Sensor Supply - Test
793F and 797F Off-Highway Trucks Braking System E239/E240 Rear Parking Brake Dragging