Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
Usage:
3406B And 3406C Truck Engines
Several improvements have been made to the Remanufactured 0R-3008 Fuel Transfer Pump available for use on these truck engines. The improvements include:
-
- * The use of pump "MASTERS" to insure correlation between the test machines at the remanufacturing plant and the original equipment manufacturer. This assures test accuracy and repeatability.
- * The use of an air/electronic gauge to insure proper clearance between the tappet plunger and the tappet body. This helps prevent fuel dilution of the engine crankcase oil.
- * The use of a spring tester to help insure quality of the transfer pump center spring and proper pump discharge pressures.
- * The use of pump "MASTERS" to insure correlation between the test machines at the remanufacturing plant and the original equipment manufacturer. This assures test accuracy and repeatability.
Caterpillar Information System:
1997/02/24 New Oil Supply And Drain Lines In Turbocharger Oil Lines Groups Used With "Mid-Mount", "New Mid-Mount", And "Low Mount" Arrangements{1307}
1997/02/24 Summary Of Changes To Timing Advance Drive Groups (Update){1272}
1997/02/24 Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24 New Specifications For Pressure Drop Across The Air-To-Air Aftercooler{1063}
1997/02/24 New O-Ring Seal Used In Hydraulically Actuated Electronic Unit Injector (HEUI) Pump Group{1714}
1997/01/27 New Gasket Used Between Air Compressor And Front Housing{1803}
1997/01/27 Timing Procedure Aid -Alignment Of Timing Gear Marks On 3406 Engines{1206}
1997/01/27 Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27 Description Of August 1996 (AUG96) Software Modifications{1902}
1997/01/27 New Remanufactured Water Pump Groups Include Cast Iron Impellers{1361}
1996/12/23 New Oil Supply And Drain Lines In Turbocharger Oil Lines Groups Used With "Mid-Mount", "New Mid-Mount", And "Low Mount" Arrangements{1307}
1996/12/23 New Thinner Exhaust Manifold Gasket Used{1059}
1997/04/01 Description Of March 1997 (MAR97) Software Modifications{1920}
1997/04/01 New "Fuel System Reuse And Salvage Guides" Reference Manual Available{1250}
1997/05/27 Procedure To Investigate Misfires On Engines Equipped With Electronic Unit Injectors (EUI){1290}
1997/05/27 Special Installation Procedure For Alternator Support Brackets{1405}
1997/05/27 Improved Brackets Used In Refrigerant Compressor Mounting Groups{1802}
1997/05/27 New Idler Gear Stub Shaft Assembly And Idler Gear Assembly Used In Front Gear Group{1206}
1997/05/27 New Alternator Now Used{1405,7168}
1997/06/23 Mechanical Unit Fuel Injector Groups Spill Shield Changed{1290}
1997/06/23 New Chrome-Plated Stem On Exhaust Valve Increases Valve And Valve Guide Wear Life{1105,1100}
1997/06/23 Improved Piston Rings Available{1215}
1997/06/23 A New And A Remanufactured TU-FLO 1400L Air Compressor Group Is Available{1803}
1997/07/01 Electronic Control Module (ECM) Part Number Changes{1901}