Front Cover - Remove and Install
Start By:
- Remove the fan drive.
- Remove the vibration damper and the pulley.
- Remove the crankshaft front seal.
- Remove bolts (2) and remove front support (1).
Show/hide table
Illustration 2 g01872517 - Remove bolts (4) and (5).
- Remove studs (3), front cover (6), and the gasket.
Show/hide table
Illustration 1 | g02851277 |
- Install front cover (6) in the reverse order of removal.
- Tighten bolts (2) to a torque of
105 ± 20 N·m (77 ± 14 lb ft) .
- Tighten bolts (2) to a torque of
Caterpillar Information System:
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control
C13 Generator Set Engine Engine Oil Cooler - Remove and Install
C13 Generator Set Engine Electronic Unit Injector Sleeve - Remove and Install
349F and 352F Excavators ECM - Replace
2013/10/09 New OMD (Oil Mist Detection) Airline Tubes Are Used on Certain 3612, 3616, C280-12, and C280-16 Engines {1071}
XQ125 Generator Set Diesel Exhaust Fluid - Fill
C13 Generator Set Engine Engine Oil Filter Base - Remove and Install
C15 and C18 Industrial Engines Plate Locations and Film Locations
C13 Generator Set Engine Electronic Unit Injector - Remove and Install
C13 Generator Set Engine Fuel Transfer Pump - Remove and Install
C13 Generator Set Engine Fuel Filter Base - Remove and Install
C13 Generator Set Engine Fuel Priming Pump - Remove and Install
C13 Generator Set Engine Camshaft - Remove and Install
C7.1 Industrial Engine Battery - Replace
3516C Petroleum Engines Air Lines
C13 Generator Set Engine Valve Mechanism Cover Base - Remove and Install
C13 Generator Set Engine Cylinder Head - Remove and Install
AP655F Asphalt Paver Diesel Exhaust Fluid Filter - Clean/Replace
C13 Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
C13 Generator Set Engine Camshaft Position Sensor - Remove and Install
C13 Generator Set Engine Coolant Temperature Sensor - Remove and Install
C13 Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
C13 Generator Set Engine Fuel Pressure Sensor - Remove and Install
XQC1600 Power Module Safety Messages