Fuel Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g03424898 - Disconnect the harness assembly and remove fuel pressure sensor (1).
- Install fuel pressure sensor (1) in the reverse order of removal.
- Tighten fuel pressure sensor (1) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
- Tighten fuel pressure sensor (1) to a torque of
Caterpillar Information System:
C13 Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
C13 Generator Set Engine Coolant Temperature Sensor - Remove and Install
C13 Generator Set Engine Camshaft Position Sensor - Remove and Install
C13 Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
AP655F Asphalt Paver Diesel Exhaust Fluid Filter - Clean/Replace
C13 Generator Set Engine Cylinder Head - Remove and Install
C13 Generator Set Engine Valve Mechanism Cover Base - Remove and Install
3516C Petroleum Engines Air Lines
C7.1 Industrial Engine Battery - Replace
C13 Generator Set Engine Camshaft - Remove and Install
C13 Generator Set Engine Front Cover - Remove and Install
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control
XQC1600 Power Module Safety Messages
C13 Generator Set Engine Fuel Temperature Sensor - Remove and Install
C13 Generator Set Engine Engine Speed Sensor - Remove and Install
C13 Generator Set Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C13 Generator Set Engine Inlet Air Temperature Sensor - Remove and Install
CX31-P600 Petroleum Transmission Safety Messages
794 AC Off-Highway Truck Fuel System - Fill - Fast Fill Fuel Adapter
794 AC Off-Highway Truck Breather (Fuel Tank) - Replace
2013/10/01 Flow Control Valve (FCV) Solenoid on Certain C3.4 Engines {1251, 1290}
2013/08/26 New Fuel Injector Return Lines Are Used On Certain C175 Engines {1252, 1254}
C175-16 Locomotive Engine Exhaust Support
G3306B Petroleum Generator Set Engines CAN Data Link - Test