Valve Mechanism Cover Base - Remove and Install
Removal Procedure
Start By:
- Remove the valve mechanism cover.
- Disconnect harness assemblies (2) and harness assembly (4) .
Show/hide table
 | |
| Illustration 1 | g01132854 |
- Disconnect hose (5) .
- Remove bolts (3) .
- Remove valve mechanism cover base (1) .
Installation Procedure
- Install valve mechanism cover base (1) in the reverse order of removal.
Caterpillar Information System:
3516C Petroleum Engines Air Lines
C7.1 Industrial Engine Battery - Replace
C13 Generator Set Engine Camshaft - Remove and Install
C13 Generator Set Engine Front Cover - Remove and Install
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control
C13 Generator Set Engine Engine Oil Cooler - Remove and Install
C13 Generator Set Engine Electronic Unit Injector Sleeve - Remove and Install
349F and 352F Excavators ECM - Replace
2013/10/09 New OMD (Oil Mist Detection) Airline Tubes Are Used on Certain 3612, 3616, C280-12, and C280-16 Engines {1071}
XQ125 Generator Set Diesel Exhaust Fluid - Fill
C13 Generator Set Engine Engine Oil Filter Base - Remove and Install
C15 and C18 Industrial Engines Plate Locations and Film Locations
C13 Generator Set Engine Cylinder Head - Remove and Install
AP655F Asphalt Paver Diesel Exhaust Fluid Filter - Clean/Replace
C13 Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
C13 Generator Set Engine Camshaft Position Sensor - Remove and Install
C13 Generator Set Engine Coolant Temperature Sensor - Remove and Install
C13 Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
C13 Generator Set Engine Fuel Pressure Sensor - Remove and Install
XQC1600 Power Module Safety Messages
C13 Generator Set Engine Fuel Temperature Sensor - Remove and Install
C13 Generator Set Engine Engine Speed Sensor - Remove and Install
C13 Generator Set Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C13 Generator Set Engine Inlet Air Temperature Sensor - Remove and Install