Air Lines
Show/hide table
Illustration 1 | g03424360 |
Show/hide table
Specification for 441-4266 Air Aftercooler Lines Gp | |||
Item | Qty | Part | Specification Description |
1 | 16 | 6V-5101 O-Ring Seal | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
Show/hide table
Illustration 2 | g03424374 |
Bolt tightening sequence for manifold assembly |
Show/hide table
Item | Qty | Part | Specification Description |
- | - | - | Bolt tightening procedure for manifold assembly : 1. Tighten the bolt 1 to 2. Tighten the bolt 2 to 3. Tighten the bolt 3 to 4. Tighten the bolt 4 to |
Show/hide table
Illustration 3 | g03424378 |
Bolt tightening sequence for after cooler assembly |
Show/hide table
Item | Qty | Part | Specification Description |
- | - | - | Bolt tightening procedure for after cooler assembly : 1. Tighten the bolt 1 to 2. Tighten the bolt 2 to 3. Tighten the bolt 3 to |
Caterpillar Information System:
C7.1 Industrial Engine Battery - Replace
C13 Generator Set Engine Camshaft - Remove and Install
C13 Generator Set Engine Front Cover - Remove and Install
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control
C13 Generator Set Engine Engine Oil Cooler - Remove and Install
C13 Generator Set Engine Electronic Unit Injector Sleeve - Remove and Install
349F and 352F Excavators ECM - Replace
2013/10/09 New OMD (Oil Mist Detection) Airline Tubes Are Used on Certain 3612, 3616, C280-12, and C280-16 Engines {1071}
XQ125 Generator Set Diesel Exhaust Fluid - Fill
C13 Generator Set Engine Engine Oil Filter Base - Remove and Install
C15 and C18 Industrial Engines Plate Locations and Film Locations
C13 Generator Set Engine Electronic Unit Injector - Remove and Install
C13 Generator Set Engine Valve Mechanism Cover Base - Remove and Install
C13 Generator Set Engine Cylinder Head - Remove and Install
AP655F Asphalt Paver Diesel Exhaust Fluid Filter - Clean/Replace
C13 Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
C13 Generator Set Engine Camshaft Position Sensor - Remove and Install
C13 Generator Set Engine Coolant Temperature Sensor - Remove and Install
C13 Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
C13 Generator Set Engine Fuel Pressure Sensor - Remove and Install
XQC1600 Power Module Safety Messages
C13 Generator Set Engine Fuel Temperature Sensor - Remove and Install
C13 Generator Set Engine Engine Speed Sensor - Remove and Install
C13 Generator Set Engine Turbocharger Outlet Pressure Sensor - Remove and Install