Fuel Filter Base - Remove and Install
- Disconnect hose assemblies (1) and hose assemblies (3).
- Disconnect harness assemblies (2).
Show/hide table
Illustration 2 g03423601 - Remove filter assembly (6) from fuel filter base (5).
- Remove bolts (4).
- Remove fuel filter base (5).
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
Illustration 1 | g03423600 |
- Install fuel filter base (5) in the reverse order of removal.
- Tighten filter assembly (6) one full turn after filter assembly (6) contacts fuel filter base (5).
Caterpillar Information System:
C13 Generator Set Engine Fuel Priming Pump - Remove and Install
312F and 313F Excavators Monitoring System
3600 and C280 Diesel Engine Fluids Recommendations Diesel Exhaust Fluid (DEF) - For Use in SCR-equipped engines
3600 and C280 Diesel Engine Fluids Recommendations Lubricant Information
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control
3600 and C280 Diesel Engine Fluids Recommendations Diesel Fuel Recommendations - Marine Engines and Certain 3600 Series Stationary Engines
C4.4 Industrial Engine Coolant (ELC) - Change
2013/12/02 New Valve Lifter Assembly Is Used in Certain G3400 Engines {1209}
C4.4 Industrial Engine Coolant (DEAC) - Change
3600 and C280 Diesel Engine Fluids Recommendations S·O·S Services Oil Analysis
XQ125 Generator Set Belt - Inspect
C4.4 Industrial Engine Belt Tensioner - Check
C13 Generator Set Engine Fuel Transfer Pump - Remove and Install
C13 Generator Set Engine Electronic Unit Injector - Remove and Install
C15 and C18 Industrial Engines Plate Locations and Film Locations
C13 Generator Set Engine Engine Oil Filter Base - Remove and Install
XQ125 Generator Set Diesel Exhaust Fluid - Fill
2013/10/09 New OMD (Oil Mist Detection) Airline Tubes Are Used on Certain 3612, 3616, C280-12, and C280-16 Engines {1071}
349F and 352F Excavators ECM - Replace
C13 Generator Set Engine Electronic Unit Injector Sleeve - Remove and Install
C13 Generator Set Engine Engine Oil Cooler - Remove and Install
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control
C13 Generator Set Engine Front Cover - Remove and Install
C13 Generator Set Engine Camshaft - Remove and Install