Fuel Transfer Pump - Remove and Install
- Turn the fuel supply to the “OFF” position.
Show/hide table
Illustration 1 g03423604 - Disconnect hose assembly (1) and remove the fitting.
- Remove nut (3) and the clip.
- Remove tube assembly (4).
- Remove bolts (5) and fuel transfer pump (2).
- Install fuel transfer pump (2) in the reverse order of removal.
Caterpillar Information System:
C13 Generator Set Engine Fuel Filter Base - Remove and Install
C13 Generator Set Engine Fuel Priming Pump - Remove and Install
312F and 313F Excavators Monitoring System
3600 and C280 Diesel Engine Fluids Recommendations Diesel Exhaust Fluid (DEF) - For Use in SCR-equipped engines
3600 and C280 Diesel Engine Fluids Recommendations Lubricant Information
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control
3600 and C280 Diesel Engine Fluids Recommendations Diesel Fuel Recommendations - Marine Engines and Certain 3600 Series Stationary Engines
C4.4 Industrial Engine Coolant (ELC) - Change
2013/12/02 New Valve Lifter Assembly Is Used in Certain G3400 Engines {1209}
C4.4 Industrial Engine Coolant (DEAC) - Change
3600 and C280 Diesel Engine Fluids Recommendations S·O·S Services Oil Analysis
XQ125 Generator Set Belt - Inspect
C13 Generator Set Engine Electronic Unit Injector - Remove and Install
C15 and C18 Industrial Engines Plate Locations and Film Locations
C13 Generator Set Engine Engine Oil Filter Base - Remove and Install
XQ125 Generator Set Diesel Exhaust Fluid - Fill
2013/10/09 New OMD (Oil Mist Detection) Airline Tubes Are Used on Certain 3612, 3616, C280-12, and C280-16 Engines {1071}
349F and 352F Excavators ECM - Replace
C13 Generator Set Engine Electronic Unit Injector Sleeve - Remove and Install
C13 Generator Set Engine Engine Oil Cooler - Remove and Install
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control
C13 Generator Set Engine Front Cover - Remove and Install
C13 Generator Set Engine Camshaft - Remove and Install
C7.1 Industrial Engine Battery - Replace