2014/02/17 Caterpillar


An Improved Foot Valve Assembly for the Fuel Transfer Pump Is Now Available as a Service Replacement on Certain 300D and 300E Series Excavators and Mobile Hydraulic Power Units {1256}

Usage:

320D L A8F
Excavator:
311D (S/N: LKA1-UP; DDW1-UP)
314D (S/N: BYJ1-UP; TXN1-UP; SBP1-UP; SSZ1-UP)
320D (S/N: MDE1-UP; A8F1-UP; A9F1-UP; KGF1-UP; MGG1-UP; DHK1-UP; FAL1-UP; WBN1-UP; GDP1-UP; PCX1-UP; PHX1-UP; CXY1-UP; JGZ1-UP)
320E (S/N: DFG1-UP; TNJ1-UP; WBK1-UP; NAZ1-UP)
323D (S/N: RAC1-UP; SDC1-UP; WGC1-UP; CYD1-UP; SED1-UP; NDE1-UP; WNE1-UP; ZMF1-UP; CWG1-UP; JLG1-UP; LFL1-UP; BYM1-UP; PBM1-UP; NES1-UP; DKW1-UP)
323E (S/N: RAP1-UP; YRP1-UP; TDW1-UP)
324D (S/N: EJC1-UP; T2D1-UP; TRH1-UP; BTK1-UP; SYM1-UP; DFP1-UP; CJX1-UP)
324E (S/N: TLF1-UP; LDG1-UP; PNW1-UP)
325D (S/N: GPB1-UP; PKE1-UP; KDG1-UP; LAL1-UP; MCL1-UP; GBR1-UP; SCR1-UP; T2S1-UP; CYW1-UP)
329D (S/N: MNB1-UP; XDB1-UP; BFC1-UP; DJF1-UP; EBM1-UP; SCY1-UP)
329E (S/N: RLD1-UP; TST1-UP; PLW1-UP)
330D (S/N: GBC1-UP; NBD1-UP; GGE1-UP; B6H1-UP; EAH1-UP; THJ1-UP; FFK1-UP; LRM1-UP; ERN1-UP; JLP1-UP; RAS1-UP; MEY1-UP; T2Y1-UP)
336D (S/N: JBF1-UP; J2F1-UP; PRF1-UP; LMG1-UP; MYG1-UP; KDJ1-UP; ZML1-UP; PPN1-UP; MYP1-UP; JWR1-UP; DTS1-UP; KKT1-UP; M4T1-UP; WET1-UP)
336E (S/N: RZA1-UP; YCE1-UP; SSL1-UP; TMZ1-UP)
345D (S/N: BYC1-UP; RAE1-UP; NEG1-UP; RGG1-UP; KFH1-UP; NLM1-UP; PBT1-UP; LKY1-UP)
349D (S/N: NNF1-UP; PZG1-UP; MEN1-UP)
349E (S/N: MZW1-UP; KFX1-UP)
UNDERCARRIAGE (S/N: L3M1-UP)
Mobile Hydraulic Power Unit:
323D MHPU (S/N: DCJ1-UP; GRL1-UP; DCY1-UP; L5Z1-UP)
324D MHPU (S/N: M4A1-UP)
325D MHPU (S/N: SRC1-UP; C3N1-UP; X3N1-UP)
329D MHPU (S/N: J8D1-UP; J9D1-UP; L5G1-UP; L5H1-UP)
329E MHPU (S/N: K2L1-UP; KNR1-UP)
330D MHPU (S/N: D3D1-UP; H3D1-UP; M3D1-UP; GMN1-UP)
336D MHPU (S/N: J6D1-UP; L5K1-UP; M3M1-UP; M3N1-UP; M2P1-UP; M3S1-UP; JRX1-UP; L5X1-UP; NBZ1-UP)
336E MHPU (S/N: PCE1-UP; RBS1-UP; DSZ1-UP; T3Z1-UP)
345D MHPU (S/N: P5D1-UP; L5R1-UP)
349D MHPU (S/N: DKN1-UP)
349E MHPU (S/N: JAE1-UP; S3P1-UP)

An improved foot valve assembly is now available as a service replacement for the machines listed above that are equipped with a fuel transfer pump arrangement. The improved foot valve has a screw type cap that can be opened for refueling, or closed when the refueling system is not in use. To prevent leaks, the cap should be kept in the closed position when not in use.

The former 190-5283 Valve As, 229-1860 Valve As or 368-5217 Valve As have been service replaced with an improved 442-3948 Valve As, 442-3949 Valve As, or 442-3947 Valve As. Table 1 lists the existing part and the service replacement.




Illustration 1g03400986

Table 1
Sales Model     Service Replacement Part Number     Part Name     Existing Part Number    
311D     442-3948     Valve As     190-5283    
314D    
320D     442-3949     Valve As     229-1860    
323D    
324D    
325D    
329D    
330D    
336D    
345D    
349D    
320E     442-3947     Valve As     368-5217    
323E    
324E    
329E    
336E    
349E    

Caterpillar Information System:

Engine Oil Contains Elevated Lead (Pb) {1348} Engine Oil Contains Elevated Lead (Pb) {1348}
C15 and C18 Industrial Engines Engine Oil Pan - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped)
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Operating Technique Information
300.9D and 300.9D VPS Mini Hydraulic Excavator Crushing Prevention and Cutting Prevention
C15 and C18 Industrial Engines Cylinder Head - Remove and Install
3500B and 3500 Marine Propulsion Engines with EUI Option Hoses and Clamps - Replace
C7 Petroleum Engine Fluid Recommendations
C7 Petroleum Engine Refill Capacities
C7 Petroleum Engine Coolant (DEAC) - Change
374F Excavator Hydraulic System Electronic Control (Travel System)
C15 and C18 Industrial Engines Vibration Damper and Pulley - Remove and Install
2013/10/31 New Auxiliary Water Pump Groups Are Used on Certain 3500 and G3500 Commercial Engines {1361}
2013/08/13 New Software Is Now Used on Certain C175 Commercial Engines {1920}
2013/07/08 Wire Relocation Required on Certain G3520 Generator Set Engines {1408, 7451}
2013/12/05 New Valve Spring Assemblies Are Used for Certain G3500C and G3500E Engines and Power Modules {1100}
C7 Petroleum Engine Product Description
C15 and C18 Industrial Engines Crankshaft Position Sensor - Remove and Install
C15 and C18 Industrial Engines Temperature Sensor (Catalyst Inlet) - Remove and Install
C15 and C18 Industrial Engines Belt Tensioner - Remove and Install
C13 Generator Set Declaration of Conformity
2013/07/01 Additional Cable Straps Are Used on Certain C175 Engines {1408, 7553}
C15 and C18 Industrial Engines Clean Emissions Module - Remove and Install
3516C Petroleum Well Service Engine Engine Stopping
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.