Refill Capacities
Kapasitas pengisian ulang untuk karter engine mencerminkan kapasitas perkiraan dari karter atau wadah ditambah dengan filter oli standar. Sistem filter oli bantu akan memerlukan oli tambahan. Bacalah spesifikasi OEM untuk mengetahui kapasitas filter oli bantu.
Show/hide table
| Engine Bensin C7
Perkiraan Kapasitas Isi Ulang |
||
|---|---|---|
| Sistem | Kapasitas Pengisian Ulang untuk Penggantian Oli dan Filter | |
| Liter | Quart | |
| Wadah Oli Dangkal(1) | 18,0 | 19,0 |
| Wadah Oli Dalam(1) | 25,0 | 26,5 |
Show/hide table
| (1) | Nilai ini harus dimasukkan oleh pelanggan sebagai kapasitas kira-kira untuk wadah oli karter yang mencakup filter oli standar yang dipasang di pabrik. Engine dengan filter oli bantu akan memerlukan oli tambahan. Bacalah spesifikasi OEM untuk mengetahui kapasitas filter oli bantu. |
Untuk memelihara sistem pendinginan, kapasitas total sistem pendinginan harus diketahui. Kapasitas total sistem pendinginan dapat berbeda-beda. Kapasitas akan bergantung pada ukuran radiator (kapasitas). Tabel 2harus diisi lengkap oleh pelanggan untuk perawatan sistem pendinginan.
Show/hide table
| Kapasitas Perkiraan untuk Sistem Pendinginan | ||
| Kompartemen atau Sistem | Liter | Quart |
| Sistem Pendinginan Total(1) | ||
Show/hide table
| (1) | Kapasitas total sistem pendinginan mencakup komponen berikut:blok engine, radiator dan semua selang dan saluran cairan pendingin. |
Catatan: Untuk informasi tambahan terkait cairan pendingin engine Anda, rujuk ke Publikasi Khusus, SEBU6251, "Caterpillar Commercial Diesel Engine Fluids Recommendations".
Caterpillar Information System:
C7 Petroleum Engine Coolant (DEAC) - Change
374F Excavator Hydraulic System Electronic Control (Travel System)
C15 and C18 Industrial Engines Vibration Damper and Pulley - Remove and Install
C7 Petroleum Engine Coolant Sample (Level 2) - Obtain
374F Excavator Hydraulic System General Information (Travel System)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modbus Register Map
Well Service Pumps System Pressure Release
C15 and C18 Industrial Engines Engine Oil Filter Base - Remove and Install
Caterpillar Petroleum Hydraulic Fracturing Transmission Installation Appraisal Procedures{3030} Caterpillar Petroleum Hydraulic Fracturing Transmission Installation Appraisal Procedures{3030}
C15 and C18 Industrial Engines Engine Oil Cooler - Remove and Install - C15 and C18
Well Stimulation Pumps Specifications
Retrofit SCR Aftertreatment Monitoring System
C7 Petroleum Engine Fluid Recommendations
3500B and 3500 Marine Propulsion Engines with EUI Option Hoses and Clamps - Replace
C15 and C18 Industrial Engines Cylinder Head - Remove and Install
300.9D and 300.9D VPS Mini Hydraulic Excavator Crushing Prevention and Cutting Prevention
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Operating Technique Information
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped)
C15 and C18 Industrial Engines Engine Oil Pan - Remove and Install
Engine Oil Contains Elevated Lead (Pb) {1348} Engine Oil Contains Elevated Lead (Pb) {1348}
2014/02/17 An Improved Foot Valve Assembly for the Fuel Transfer Pump Is Now Available as a Service Replacement on Certain 300D and 300E Series Excavators and Mobile Hydraulic Power Units {1256}
2013/10/31 New Auxiliary Water Pump Groups Are Used on Certain 3500 and G3500 Commercial Engines {1361}
2013/08/13 New Software Is Now Used on Certain C175 Commercial Engines {1920}
2013/07/08 Wire Relocation Required on Certain G3520 Generator Set Engines {1408, 7451}