C7 Petroleum Engine Caterpillar


Coolant Sample (Level 2) - Obtain

Usage:

C7 C7P


PERHATIAN

Gunakan selalu pompa yang khusus ditujukan untuk pengambilan sampel oli dan gunakan pompa yang terpisah untuk pengambilan sampel cairan pendingin. Penggunaan pompa yang sama untuk kedua tipe sampel dapat menyebabkan kontaminasi pada sampel yang diambil. Kontaminasi ini dapat menyebabkan analisa yang keliru dan interpretasi yang tidak benar yang dapat mengakibatkan kecemasan baik bagi dealer dan pelanggan.



PERHATIAN

Berhati-hatilah agar cairan tidak tumpah selama pemeriksaan, perawatan, pengujian, penyetelan, dan perbaikan produk. Siapkan wadah penampung cairan sebelum membuka kompartemen atau membongkar komponen yang berisi cairan.

Lihat Publikasi Khusus, NENG2500, "Cat Dealer Servis Tool Catalog" atau lihat Publikasi Khusus, PECJ0003, "Cat Shop Supplies and Tools Catalog" untuk peranti dan perlengkapan yang sesuai untuk menampung dan menyimpan cairan pada produk-produk Caterpillar .

Buang semua cairan sesuai peraturan dan ketentuan yang berlaku.


Untuk panduan pengambilan sampel cairan pendingin yang benar, rujuk ke Buku Petunjuk Pengoperasian dan PerawatanPengambilan - , "Sampel Cairan Pendingin Sistem Pendinginan (Tingkat 1)".

Kirimkan sampel untuk analisis Tingkat 2.

Untuk informasi tambahan tentang analisis cairan pendingin, lihat Publikasi Khusus, SEBU6251, "Caterpillar Commercial Diesel Engines Fluids Recommendations" atau hubungi dealer Cat Anda.

Caterpillar Information System:

374F Excavator Hydraulic System General Information (Travel System)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modbus Register Map
Well Service Pumps System Pressure Release
C15 and C18 Industrial Engines Engine Oil Filter Base - Remove and Install
Caterpillar Petroleum Hydraulic Fracturing Transmission Installation Appraisal Procedures{3030} Caterpillar Petroleum Hydraulic Fracturing Transmission Installation Appraisal Procedures{3030}
C15 and C18 Industrial Engines Engine Oil Cooler - Remove and Install - C15 and C18
Well Stimulation Pumps Specifications
Retrofit SCR Aftertreatment Monitoring System
2013/08/13 A New Auxiliary Sea Water Pump and Sleeves Are Used for Certain C32 Engines {1371}
Well Stimulation Pumps Pump (Fluid End) Discharge Flanges and Seals - Inspect
C7.1 Marine Generator Set Fuel System Secondary Filter - Replace
Retrofit SCR Aftertreatment Before Starting Engine
C15 and C18 Industrial Engines Vibration Damper and Pulley - Remove and Install
374F Excavator Hydraulic System Electronic Control (Travel System)
C7 Petroleum Engine Coolant (DEAC) - Change
C7 Petroleum Engine Refill Capacities
C7 Petroleum Engine Fluid Recommendations
3500B and 3500 Marine Propulsion Engines with EUI Option Hoses and Clamps - Replace
C15 and C18 Industrial Engines Cylinder Head - Remove and Install
300.9D and 300.9D VPS Mini Hydraulic Excavator Crushing Prevention and Cutting Prevention
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Operating Technique Information
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped)
C15 and C18 Industrial Engines Engine Oil Pan - Remove and Install
Engine Oil Contains Elevated Lead (Pb) {1348} Engine Oil Contains Elevated Lead (Pb) {1348}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.