Model View Illustrations
Následující výkresové pohledy znázorňují typické součásti motoru, které jsou podporovány tímto servisním modulem. Z důvodu individuálních aplikací se může váš motor od ilustrací lišit.
Show/hide table
| |
| Ilustrace 1 | g03390798 |
|
C27 Pohled z pravé strany (1) turbodmychadlo, (2) Závěsné oko (3) Palivové filtry (4) Odlučovač vody (5) olejový chladič, (6) Filtry motorového oleje (7) Chladič výfukových plynů (8) Měrka hladiny oleje (9) Vypouštění oleje (10) Plnicí hrdlo oleje | |
Show/hide table
| |
| Ilustrace 2 | g03391076 |
|
C27 Pohled z levé strany (11) Závěsné oko (12) elektronický řídicí modul (ECM) (13) Olejová pánev (14) Alternátor (15) Napínač řemene | |
Caterpillar Information System:
Well Stimulation Pumps Pump (Power End) Lube Oil - Change
Well Stimulation Pumps Pump (Power End) Lube Suction Strainer - Clean
Well Stimulation Pumps Pump (Power End) Lube System - Check
Well Stimulation Pumps Pump (Power End) Lube Oil Level - Check
Well Service Pumps Pump (Power End) Lube Oil Pressure - Check
C27 Petroleum Engine Product Description
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Manifold (Suction) - Remove and Install
Well Stimulation Pumps Pump (Power End) Lube Oil Filter - Replace - If Equipped
Initial Filling of the Dosing Cabinet Tank with Diesel Exhaust Fluid (DEF){108K, 108T} Initial Filling of the Dosing Cabinet Tank with Diesel Exhaust Fluid (DEF){108K, 108T}
2013/06/06 Utilizing CLAAS OMM Information for Certain Caterpillar Industrial Engines {1000}
Well Stimulation Pumps Pump (Fluid End) Suction Pulsation Dampener - Check
2013/06/06 New Fuel Pressure Sensors Are Available to Replace the ARD Pilot and Main Pressure Sensors on Certain Engines {1274, 1439, 1702}
374F Excavator Hydraulic System Check Valve (Load)
Procedure For Tightening of SAE Plugs on Certain Flywheel UPS Products{1156, 4480} Procedure For Tightening of SAE Plugs on Certain Flywheel UPS Products{1156, 4480}
C32 Marine Engine Engine Oil Level Gauge - Calibrate
C32 Auxiliary Engine Engine Oil Level Gauge - Calibrate
C4.4 Industrial Engine Cold Weather Operation
Well Service Pumps Fluid Recommendations
C27 Industrial Engine and C27 Locomotive Engine Safety Messages
C15 and C18 Industrial Engines Nitrogen Oxide Sensor - Remove and Install
C27 Industrial Engine and C27 Locomotive Engine Plate Locations and Film Locations
C27 Industrial Engine and C27 Locomotive Engine Product Lifting
C27 Industrial Engine and C27 Locomotive Engine Engine Oil and Filter - Change
Spring Isolator Installation Instructions{1021, 7002} Spring Isolator Installation Instructions{1021, 7002}