Manifold (Suction) - Remove and Install
Removal Procedure
Show/hide table
| Require Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 129-1966 | Multipurpose Grease | - |
Show/hide table
| Approximate weight of manifold (suction) (2) | |
| Sales Model | Approximate Weight |
| WS273 XD WSF273 XD |
83 kg (183 lb) |
| WS305 XD WSF305 XD |
153 kg (337 lb) |
- Use a suitable lifting device to remove manifold (suction) (2) . Refer to Table 2 for the approximate weight of manifold (suction) (2) . Remove bolts (1) and manifold (suction) (2) .
Show/hide table
 | |
| Illustration 1 | g03390693 |
- Remove O-ring seals (3) .
Show/hide table
 | |
| Illustration 2 | g03645849 |
Installation Procedure
- Install manifold (suction) (2) in the reverse order of removal.
- Apply Tooling (A) to O-ring seals (3) .
- Tighten bolts (1) to a torque of 494 N·m (364 lb ft).
Caterpillar Information System:
Well Stimulation Pumps Pump (Power End) Lube Oil Filter - Replace - If Equipped
Initial Filling of the Dosing Cabinet Tank with Diesel Exhaust Fluid (DEF){108K, 108T} Initial Filling of the Dosing Cabinet Tank with Diesel Exhaust Fluid (DEF){108K, 108T}
2013/06/06 Utilizing CLAAS OMM Information for Certain Caterpillar Industrial Engines {1000}
Well Stimulation Pumps Pump (Fluid End) Suction Pulsation Dampener - Check
2013/06/06 New Fuel Pressure Sensors Are Available to Replace the ARD Pilot and Main Pressure Sensors on Certain Engines {1274, 1439, 1702}
374F Excavator Cab Door
3512E Tier 4 Final Engines for Land Electric Drilling Oil Filter Differential Pressure Problem
Well Stimulation Pumps Pump (Fluid End) Plunger Lube System - Check
Well Stimulation Pumps Pump (Fluid End) Plunger Lube Oil Level - Check
Well Stimulation Pumps Safety Messages
Well Service Pumps Operation
Well Stimulation Pumps Before Operation
C27 Petroleum Engine Product Description
Well Service Pumps Pump (Power End) Lube Oil Pressure - Check
Well Stimulation Pumps Pump (Power End) Lube Oil Level - Check
Well Stimulation Pumps Pump (Power End) Lube System - Check
Well Stimulation Pumps Pump (Power End) Lube Suction Strainer - Clean
Well Stimulation Pumps Pump (Power End) Lube Oil - Change
C27 Industrial Engine and C27 Locomotive Engine Model View Illustrations
374F Excavator Hydraulic System Check Valve (Load)
Procedure For Tightening of SAE Plugs on Certain Flywheel UPS Products{1156, 4480} Procedure For Tightening of SAE Plugs on Certain Flywheel UPS Products{1156, 4480}
C32 Marine Engine Engine Oil Level Gauge - Calibrate
C32 Auxiliary Engine Engine Oil Level Gauge - Calibrate
C4.4 Industrial Engine Cold Weather Operation