Lubrication System Operation
图 1 描述了经过润滑系统的发动机机油流。
Show/hide table
图 1 | g01161789 |
润滑系统示意图 |
Caterpillar Information System:
G3500 Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Electronic Control (Diesel Exhaust Fluid)
G3500 A3 Engines Exhaust Manifold - Water Cooled
C175-16 Locomotive Engine Pressure Control Valve - Oil Regulator Valve and Oil Bypass Valve
G3500 A3 Engines Exhaust Manifold
G3500 A3 Engines Turbocharger
G3500 Engines Exhaust Manifold - Water Cooled
G3516 Engines Gas Shutoff Valve
Inspecting the Diesel Oxidation Catalyst (DOC) and the Diesel Particulate Filter (DPF) After the NRS Cooler Fails{108F, 108G} Inspecting the Diesel Oxidation Catalyst (DOC) and the Diesel Particulate Filter (DPF) After the NRS Cooler Fails{108F, 108G}
G3500 Engines Turbocharger
G3516 Engines Stub Shaft (Front)
G3500 A3 Engines Vibration Damper Guard
C175-16 Engine for 795F Series AC Off-Highway Trucks Auxiliary Water Pump
G3500 Engines Piston and Rings
C280-16 Generator Set Engine for Nuclear Applications Camshaft Timing
C280-16 Generator Set Engine for Nuclear Applications Engine Speed/Timing Sensor
G3512H and G3516H Generator Set Engines Rocker Shaft and Push Rod - Remove and Install
C280-16 Generator Set Engine for Nuclear Applications Speed Control
G3512H and G3516H Generator Set Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Flywheel Housing - Remove and Install
G3512H and G3516H Generator Set Engines Gear Group (Rear) - Remove and Install
C280 Marine Engines Engine Governing - Adjust
G3512H and G3516H Generator Set Engines Crankshaft Main Bearings - Remove and Install