G3500 A3 Engines Caterpillar


Exhaust Manifold - Water Cooled

Usage:

G3516 N6A


Illustration 1g03370936

Table 1
Specification for 381-4701 Exhaust Manifold Gp 
Item  Qty  Part  Specification Description 
2B-0858 Pipe Plug  Before assembly, lubricate the threads and washer faces with Loctite C5A Copper Anti-Seize. 
32  1D-4706 Bolt  Before assembly, lubricate the threads and washer faces with Loctite C5A Copper Anti-Seize.
Torque to 55 ± 10 N·m (41 ± 7 lb ft)
32  0L-2070 Bolt  Before assembly, lubricate the threads and washer faces with Loctite C5A Copper Anti-Seize.
Torque to 55 ± 10 N·m (41 ± 7 lb ft)

Caterpillar Information System:

C175-16 Locomotive Engine Pressure Control Valve - Oil Regulator Valve and Oil Bypass Valve
G3500 A3 Engines Exhaust Manifold
G3500 A3 Engines Turbocharger
G3500 Engines Exhaust Manifold - Water Cooled
G3516 Engines Gas Shutoff Valve
Inspecting the Diesel Oxidation Catalyst (DOC) and the Diesel Particulate Filter (DPF) After the NRS Cooler Fails{108F, 108G} Inspecting the Diesel Oxidation Catalyst (DOC) and the Diesel Particulate Filter (DPF) After the NRS Cooler Fails{108F, 108G}
G3500 Engines Turbocharger
G3516 Engines Stub Shaft (Front)
G3500 A3 Engines Vibration Damper Guard
G3516 Engines Vibration Damper Guard
G3516 Engines Engine Oil Pan
G3500J Petroleum Engines Jacket Water Heater Mount
C13, C15, and C18 Tier 4 Final Engines Electronic Control (Diesel Exhaust Fluid)
G3500 Engines Turbocharger
C280 Marine Engines Lubrication System Operation
C175-16 Engine for 795F Series AC Off-Highway Trucks Auxiliary Water Pump
G3500 Engines Piston and Rings
C280-16 Generator Set Engine for Nuclear Applications Camshaft Timing
C280-16 Generator Set Engine for Nuclear Applications Engine Speed/Timing Sensor
G3512H and G3516H Generator Set Engines Rocker Shaft and Push Rod - Remove and Install
C280-16 Generator Set Engine for Nuclear Applications Speed Control
G3512H and G3516H Generator Set Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Flywheel Housing - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.