Turbocharger
Show/hide table
| |
| Illustration 1 | g03370945 |
Show/hide table
| Specification for 379-5371 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 4W-1478 Exhaust Seal | Install the rings so that the breaks in the rings are not aligned. Rotate the rings for approximately 45 degrees from one ring to the next ring. |
| 2 | 8 | 168-7800 Locknut | Before assembly, apply Loctite C5A Copper Anti-Seize to the threads. |
| Torque to |
|||
| 3 | - | - | Use the following procedure to tighten the clamp: 1. Tighten the clamp to 2. Gently tap around the clamps with a soft faced hammer. 3. Again tighten the clamp to |
| 4 | - | - | Use the following procedure to tighten the clamp: 1. Tighten the clamp to 2. Gently tap around the clamps with a soft faced hammer. 3. Again tighten the clamp to |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Electronic Control (Diesel Exhaust Fluid)
G3500 A3 Engines Exhaust Manifold - Water Cooled
C175-16 Locomotive Engine Pressure Control Valve - Oil Regulator Valve and Oil Bypass Valve
G3500 A3 Engines Exhaust Manifold
G3500 A3 Engines Turbocharger
G3500 Engines Exhaust Manifold - Water Cooled
G3516 Engines Gas Shutoff Valve
Inspecting the Diesel Oxidation Catalyst (DOC) and the Diesel Particulate Filter (DPF) After the NRS Cooler Fails{108F, 108G} Inspecting the Diesel Oxidation Catalyst (DOC) and the Diesel Particulate Filter (DPF) After the NRS Cooler Fails{108F, 108G}
G3500 Engines Turbocharger
G3516 Engines Stub Shaft (Front)
G3500 A3 Engines Vibration Damper Guard
G3516 Engines Vibration Damper Guard
C280 Marine Engines Lubrication System Operation
C175-16 Engine for 795F Series AC Off-Highway Trucks Auxiliary Water Pump
G3500 Engines Piston and Rings
C280-16 Generator Set Engine for Nuclear Applications Camshaft Timing
C280-16 Generator Set Engine for Nuclear Applications Engine Speed/Timing Sensor
G3512H and G3516H Generator Set Engines Rocker Shaft and Push Rod - Remove and Install
C280-16 Generator Set Engine for Nuclear Applications Speed Control
G3512H and G3516H Generator Set Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Flywheel Housing - Remove and Install
G3512H and G3516H Generator Set Engines Gear Group (Rear) - Remove and Install
C280 Marine Engines Engine Governing - Adjust