G3500 Engines Caterpillar


Turbocharger

Usage:

G3516 E62


Illustration 1g03370825

Table 1
Specification for 379-5326 Turbocharger Gp and 379-5352 Turbocharger Gp 
Item  Qty  Part  Specification Description 
4W-1478 Exhaust Seal  Install the rings so that the breaks in the rings are not aligned. Rotate the rings for approximately 45 degrees from one ring to the next ring. 
168-7800 Locknut  Before assembly, apply Loctite C5A Copper Anti-Seize to the threads. 
Torque to 54 ± 5 N·m (40 ± 4 lb ft).
Torque to 20.0 ± 1.5 N·m (177.0 ± 13.3 lb in)
Use the following procedure to tighten the clamp:

1. Tighten the clamp to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in).
2. Gently tap around the clamps with a soft faced hammer.
3. Again tighten the clamp to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in)
Use the following procedure to tighten the clamp:

1. Tighten the clamp to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in).
2. Gently tap around the clamps with a soft faced hammer.
3. Again tighten the clamp to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in)


Illustration 2g03370818
Top view

Table 2
Item  Qty  Part  Specification Description 
Torque to 20.0 ± 1.5 N·m (177.0 ± 13.3 lb in)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.