UPS 750 Uninterruptible Power Supply Caterpillar


Specifications

Usage:

UPS 750 AD2
UPS 750 60-Hz 详情

表 1
额定值    
最高 kVA     750    
最高 kW     675    
输入    
电压 (1)     480 VAC,3 相,3 线加接地 (1)    
电压范围     +10% / -15%(可编程设定)    
频率     60 Hz +/-10% 最大(可编程设定),+/- 3% 默认    
功率因子     额定负载和标称电压下为 0.99    
谐波电流畸变        
线性负载     <3% @ 100% 负载    
非线性负载     <5% @ 100% 负载    
电流 - 标称 (480 VAC)     846 安    
电流 - 最大连续     1050 安    
电涌耐受力     满足 IEEE 587/ANSI C62.41    
接渡     1-15 秒(可编程设定)    
输出    
电压 (1)     480 VAC,3 相,3 线加接地    
电压调节        
稳态     +/-1%(对于 +/-10% 输入)    
飞轮模式     +/-1% 稳态    
瞬态     +/-1%(50 毫秒内,对于 100% 阶跃负载)    
电压畸变 (2)     <3% 线性负载和 <5% for 100% 非线性负载 (2)    
频率     60 Hz(电源同步) - (正常运行 +/-0.2% 自由运行)    
变化率     从 0.2Hz/s 调整为 3.0Hz/s    
电流 - 标称 (480 VAC)     903 安    
过载能力 - 电源操作     连续 105%,10 分钟 110%,10 秒 150%,瞬时 200%    
UPS 效率 (3)     97.5%    
环境    
可听噪声     <83 DBA @ 1 m    
温度        
营业     (0° C)(32° F) 至 (40° C)(104° F)    
存放     (−25° C)(−13° F) 至 (70° C)(158° F)    
湿度     5% 至 95%(不凝结)    
海拔高度 (4)     最高至 (914 m)(2998.69 ft) (3)    
辐射和抗扰性     FCC A 类,第 15 部分,第 J 子部分/ EN 62040-2    
散热 - 在线 (5)        
k/W     20.43    
BTU/Hr     69,766    
物理数据    
高度     (2,032 mm)(80.0 in)    
宽度     (3,353 mm)(132.0 in)    
深度     (998 mm)(39.3 in)    
配重     (5,375 kg)(11850 lbs)    
电缆入口     顶部或底部    
安全     UL 1778 和 CUL CAN/CSA 22.2 No. 107.1 列表待定    
( 1 ) 4 线选项可用
( 1 ) 4 线选项可用
( 2 ) 根据 EN 62040-3
( 3 ) 直流蓄能离线
( 4 ) 高海拔下减额工作温度
( 5 ) 直流蓄能在线

UPS 750 50-Hz 详情

表 2
额定值    
最高 kVA     625    
最高 kW     625    
输入    
电压 (1)     380 / 400 / 415 VAC,3 相、4 线带接地(从接地的 Y 型电源)    
电压范围     +10% @ 380 VAC    
频率     50 Hz(电源同步) - (正常运行 +/-0.2% 自由运行)    
功率因子     额定负载和标称电压下为 0.99    
谐波电流畸变        
线性负载     <3% @ 100% 负载    
非线性负载     <8% @ 100% 负载    
电流 - 标称 (380 VAC)     990 安    
电流 - 标称 (400 VAC)     940 安    
电流 - 标称 (415 VAC)     906 安    
电流 - 最大     1200 安    
电涌耐受力     满足 IEEE 587/ANSI C62.41    
接渡     1-15 秒(可编程设定)    
输出    
电压 (1)     380 / 400 / 415 VAC,3 相、4 线带接地(从接地的 Y 型电源)    
电压调节        
稳态     +/-1%(对于 +/-10% 输入)    
飞轮模式     +/-1% 稳态    
瞬态     +/-1%(50 毫秒内,对于 100% 阶跃负载)    
电压畸变 (2)     <3% 线性负载和 <5% for 100% 非线性负载 (2)    
频率     50 Hz(电源同步) - (正常运行 +/-0.2% 自由运行)    
变化率     从 0.2Hz/s 调整为 3.0Hz/s    
电流 - 标称 (380 VAC)     951 安    
电流 - 标称 (400 VAC)     903 安    
电流 - 标称 (415 VAC)     871 安    
过载能力 - 电源操作     连续 105%,5 分钟 110%,60 秒 125%,10 秒 150%,瞬时 200%    
UPS 效率 (3)     97.5%    
环境    
可听噪声     <83 DBA @ 1 m    
温度        
营业     (0° C)(32° F) 至 (40° C)(104° F)    
存放     (−25°C - 70°C)(−13°F - 126°F)    
湿度     5% 至 95%(不凝结)    
海拔高度 (4)     最高至 (1,000 m)(3,281 ft)    
辐射和抗扰性     FCC A 类,第 15 部分,第 J 子部分/ EN 62040-2    
散热 - 在线 (5)        
k/W     20.4    
BTU/Hr     69,757    
物理数据    
高度     (2,032 mm)(80.0 in)    
宽度     (3,353 mm)(132.0 in)    
深度     (998 mm)(39.3 in)    
配重     (4672 kg)(10,200 lb)    
电缆入口     顶部或底部    
安全     UL 1778 和 CUL CAN/CSA 22.2 No. 107.1 列表待定    
( 1 ) 60-Hz 可用
( 1 ) 60-Hz 可用
( 2 ) EN 62040-3
( 3 ) 直流蓄能离线
( 4 ) 高海拔下减额工作温度
( 5 ) 直流蓄能在线

Caterpillar Information System:

374F Excavator Engine and Machine Warm-Up
Comm Adapter 3 and Computer Settings for Tier 4 Final Engines {1926, 7610, 7620} Comm Adapter 3 and Computer Settings for Tier 4 Final Engines {1926, 7610, 7620}
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
349F and 352F Excavators Diesel Exhaust Fluid - Fill
C9 Engine Plate Locations and Film Locations
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Speed/Timing Sensor
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Hoses and Clamps - Inspect/Replace
Retrofit SCR Aftertreatment Maintenance Recommendations
2013/03/05 A New Procedure Is Now Used On Certain C9 Engines When Torquing The Alternator Bracket {1405}
Guidelines for Servicing Flexible Couplings on Certain C175-16 Locomotive and Petroleum Engines{3252} Guidelines for Servicing Flexible Couplings on Certain C175-16 Locomotive and Petroleum Engines{3252}
C9 Engine Belts - Inspect/Adjust/Replace
UPS 750 Uninterruptible Power Supply System Description
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Piston Motor (Water Pump) Speed - Test
2013/03/15 A New Software Update Is Used For Certain C18 Tier 4 Engines {1901, 1920}
3516B Engine for the MT4400D Off-Highway Truck Crankcase Breather
3516B Engine for the MT4400D Off-Highway Truck Water Lines
G3516H and G3520H Generator Set Engines Cover Group (Rear Housing)
G3516H and G3520H Generator Set Engines Engine Design
Procedure to Install Water Delivery System (Factory Option) (S/N: M6J) on the 777G WTR {5612} Procedure to Install Water Delivery System (Factory Option) (S/N: M6J) on the 777G WTR {5612}
3516B Engine for the MT4400D Off-Highway Truck Cover Group (Front Housing)
3512C HD SR500 Generator Sets Generator Winding - Test
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Torque Converter (Freewheel Stator) (Lockup) - Disassemble
G3512H and G3516H Generator Set Engines Electric Starting Motor - Remove and Install
2013/05/03 Improved Thermocouples Are Available for Certain G3500 and G3600 Engines {1906, 1919, 1921, 1922, 1928, 1929}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.