C9 Engine Caterpillar


Plate Locations and Film Locations

Usage:

C9 P7Z


Illustration 1g03354561
View of the left side of a C9 Engine
The serial number plate is located on the left side of the cylinder block. The engine control module will obstruct the view of the serial number plate.


Illustration 2g00764267
Serial number plate

The following information is stamped on the serial number plate: engine serial number, engine model and arrangement number.



Illustration 3g03354562
View of the top of a C9 Engine
The engine information plate is located toward the rear of the valve cover. The engine information plate may be read from the right side of the engine.


Illustration 4g01347963
Engine information plate

The following information is on the information plate: engine serial number, engine model, engine arrangement number, maximum altitude of the engine that is necessary to achieve the rated power, horsepower, high idle, full load rpm, fuel settings and other information

Caterpillar Information System:

C3.3B Tier 4 Final Engines for Caterpillar Built Machines Speed/Timing Sensor
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Hoses and Clamps - Inspect/Replace
Retrofit SCR Aftertreatment Maintenance Recommendations
2013/03/05 A New Procedure Is Now Used On Certain C9 Engines When Torquing The Alternator Bracket {1405}
Guidelines for Servicing Flexible Couplings on Certain C175-16 Locomotive and Petroleum Engines{3252} Guidelines for Servicing Flexible Couplings on Certain C175-16 Locomotive and Petroleum Engines{3252}
C9 Engine Belts - Inspect/Adjust/Replace
UPS 750 Uninterruptible Power Supply System Description
2013/03/13 A New Bracket and Related Components, for the Exhaust Manifold Group, Are Used on Certain C27 Industrial Engines {1059}
2014/05/20 New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
C1.5 and C2.2 Industrial Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C1.5 and C2.2 Industrial Engines Engine Pressure Sensor Open or Short Circuit - Test
G3516H and G3520H Generator Set Engines Ignition Transformer
349F and 352F Excavators Diesel Exhaust Fluid - Fill
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
Comm Adapter 3 and Computer Settings for Tier 4 Final Engines {1926, 7610, 7620} Comm Adapter 3 and Computer Settings for Tier 4 Final Engines {1926, 7610, 7620}
374F Excavator Engine and Machine Warm-Up
UPS 750 Uninterruptible Power Supply Specifications
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Piston Motor (Water Pump) Speed - Test
2013/03/15 A New Software Update Is Used For Certain C18 Tier 4 Engines {1901, 1920}
3516B Engine for the MT4400D Off-Highway Truck Crankcase Breather
3516B Engine for the MT4400D Off-Highway Truck Water Lines
G3516H and G3520H Generator Set Engines Cover Group (Rear Housing)
G3516H and G3520H Generator Set Engines Engine Design
Procedure to Install Water Delivery System (Factory Option) (S/N: M6J) on the 777G WTR {5612} Procedure to Install Water Delivery System (Factory Option) (S/N: M6J) on the 777G WTR {5612}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.