Turbocharger
Show/hide table
Illustration 1 | g03354700 |
Front view of engine |
Show/hide table
Specification for 395-1149 Turbocharger Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 16     | 2N-2766 Locknut     | Torque to 55 ± 5 N·m (41 ± 4 lb ft).     |
2     | 16     | 5P-7128 High Temperature Bolt     | Before assembly, apply Loctite C5A copper anti-seize to the threads.     |
Show/hide table
Illustration 2 | g03354702 |
Show/hide table
Specification for 395-1149 Turbocharger Gp     | |||
Item     | Qty     | Part     | Specification Description     |
3     | 1     | 268-2960 Clamp As     | Use the following procedure in order to tighten the clamp assembly:     |
1. Before assembly, apply Loctite C5A copper anti-seize to the threads. | |||
2. Tighten to 13.2 ± 1.5 N·m (116.8 ± 13.3 lb in). |
|||
3. Gently tap around the clamp assembly. | |||
4. Again, tighten to 13.2 ± 1.5 N·m (116.8 ± 13.3 lb in). |
|||
4     | 1     | 9N-2038 Turbine Clamp As     | Use the following procedure in order to tighten the turbine clamp assembly:     |
1. Before assembly, apply Loctite C5A copper anti-seize to the threads. | |||
2. Tighten to 13.2 ± 1.5 N·m (116.8 ± 13.3 lb in). |
|||
3. Gently tap around the turbine clamp assembly. | |||
4. Again, tighten to 13.2 ± 1.5 N·m (116.8 ± 13.3 lb in). |
Caterpillar Information System:
349F and 352F Excavators Diesel Exhaust Fluid - Fill
C9 Engine Plate Locations and Film Locations
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Speed/Timing Sensor
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Hoses and Clamps - Inspect/Replace
Retrofit SCR Aftertreatment Maintenance Recommendations
2013/03/05 A New Procedure Is Now Used On Certain C9 Engines When Torquing The Alternator Bracket {1405}
Guidelines for Servicing Flexible Couplings on Certain C175-16 Locomotive and Petroleum Engines{3252} Guidelines for Servicing Flexible Couplings on Certain C175-16 Locomotive and Petroleum Engines{3252}
C9 Engine Belts - Inspect/Adjust/Replace
UPS 750 Uninterruptible Power Supply System Description
2013/03/13 A New Bracket and Related Components, for the Exhaust Manifold Group, Are Used on Certain C27 Industrial Engines {1059}
2014/05/20 New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
C1.5 and C2.2 Industrial Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
Comm Adapter 3 and Computer Settings for Tier 4 Final Engines {1926, 7610, 7620} Comm Adapter 3 and Computer Settings for Tier 4 Final Engines {1926, 7610, 7620}
374F Excavator Engine and Machine Warm-Up
UPS 750 Uninterruptible Power Supply Specifications
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Piston Motor (Water Pump) Speed - Test
2013/03/15 A New Software Update Is Used For Certain C18 Tier 4 Engines {1901, 1920}
3516B Engine for the MT4400D Off-Highway Truck Crankcase Breather
3516B Engine for the MT4400D Off-Highway Truck Water Lines
G3516H and G3520H Generator Set Engines Cover Group (Rear Housing)
G3516H and G3520H Generator Set Engines Engine Design
Procedure to Install Water Delivery System (Factory Option) (S/N: M6J) on the 777G WTR {5612} Procedure to Install Water Delivery System (Factory Option) (S/N: M6J) on the 777G WTR {5612}
3516B Engine for the MT4400D Off-Highway Truck Cover Group (Front Housing)
3512C HD SR500 Generator Sets Generator Winding - Test