Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
- Engine:
- G3508 (S/N: 9TG1-UP; WPM1-UP; WPN1-UP; DLR1-UP)
- Petroleum Engine:
- G3520B (S/N: TPC1-UP)
- G3508B (S/N: RBK1-UP)
- G3512 (S/N: 7NJ1-UP; WPP1-UP; WPR1-UP)
- G3512B (S/N: JHH1-UP)
- G3512E (S/N: SSR1-UP; NGS1-UP)
- G3516 (S/N: 4EK1-UP)
- G3516B (S/N: JEF1-UP)
- G3520B (S/N: GLF1-UP)
- G3520E (S/N: GZE1-UP)
. The sales model in the title was also changed.
Moisture can collect inside the 343-1902 Gas Control Valve. The moisture can contribute to bearing seizure inside the valve.
To allow moisture to drain, use a 3/8 inch hex wrench to remove the plug from the under side of the valve. Refer to Illustration 1.
Show/hide table
Illustration 1 | g03329970 |
Caterpillar Information System:
PM3516 Power Modules Coolant Level - Check
390F Excavator Lifting Capacities
C13 Tier 4 Final Engines Gear Group (Rear)
3500 Industrial Engines Air Starting Motor
C1.5 and C2.2 Industrial Engines Valve Position Sensor - Test
3508B Industrial Engines Aftercooler Water Lines
421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000} 421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000}
2012/12/14 New Software Is Used by Certain 3500C Locomotive Engines {1901, 1920}
3508B Industrial Engines Water Lines
3508B Industrial Engines Flywheel
C1.5 and C2.2 Industrial Engines ECM Memory - Test
3500B Engines Water Lines
2012/12/13 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
Marine Multi-Station Control System Button Panel - Test
2012/12/21 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, and C15 Engines {1206}
PM3516 Power Modules Coolant (DEAC) - Change
PM3516 Power Modules Coolant (ELC) - Change
2012/12/10 3412 Marine Engine Overhaul Kits Are Available for Top End and Major Overhauls {1000}
374F Excavator Machine System Joystick Control
C13 Tier 4 Final Engines Gear Group (Rear)
419-8232 Major Engine Overhaul Kit for 3412C Marine Engines{1000} 419-8232 Major Engine Overhaul Kit for 3412C Marine Engines{1000}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is High - Diesel System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Air Cleaner