Aftercooler Water Lines
Show/hide table
 | |
| Illustration 1 | g03329685 |
Show/hide table
| Specification for 382-7827 Aftercooler Water Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 8T-1919 O-Ring Seal | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
| 2 | 1 | 5B-4399 O-Ring Seal | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
Caterpillar Information System:
421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000} 421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000}
2012/12/14 New Software Is Used by Certain 3500C Locomotive Engines {1901, 1920}
3508B Industrial Engines Water Lines
3508B Industrial Engines Flywheel
C1.5 and C2.2 Industrial Engines ECM Memory - Test
3500B Engines Water Lines
3500 Industrial Engines Air Cleaner
3508B Industrial Engines Turbocharger
2012/12/10 New Valve Lash Settings Are Used for C175 Engines {1102, 1121, 1123}
374F Excavator Joystick Controls
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Gas System
C280 Marine and Petroleum Engines Direct Fuel Control Mode - Test
C1.5 and C2.2 Industrial Engines Valve Position Sensor - Test
3500 Industrial Engines Air Starting Motor
C13 Tier 4 Final Engines Gear Group (Rear)
390F Excavator Lifting Capacities
PM3516 Power Modules Coolant Level - Check
2013/01/03 Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
2012/12/13 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
Marine Multi-Station Control System Button Panel - Test
2012/12/21 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, and C15 Engines {1206}
PM3516 Power Modules Coolant (DEAC) - Change
PM3516 Power Modules Coolant (ELC) - Change