New Software Is Used by Certain 3500C Locomotive Engines {1901, 1920}
- Engine:
- 3508C (S/N: F1X1-UP)
- 3512C (S/N: F2X1-UP)
- 3516C (S/N: SDX1-UP)
Description of Change: The histogram feature in new software has been improved.
Adaptable To: The engine ratings, the new software part numbers, and the former software part numbers are listed in Table 1. The former software has been canceled.
The new software is effective with the following serial numbers:
- SDX00108
- F1X00209
- F2X00262
Note: Software part numbers are subject to change without notice. Always use the latest software for your engine.
Show/hide table
Engine Sales Model     | Rated rpm     | BKW     | BHP     | Electronic Ratings Group     | New Software     | Former Software     |
3516C     | 1800     | 3000     | 4023     | 317-3675     | 367-5135     | 330-6025     |
3508C     | 1800     | 1000     | 1341     | 341-1378     | 367-5136     | 341-1379     |
3512C     | 1800     | 1350     | 1810     | 354-7478     | 367-5137     | 354-7479     |
1800 | 1550     | 2079     | ||||
3512C     | 1800     | 1700     | 2280     | 347-6382     | 393-6120     | 374-7140     |
Caterpillar Information System:
3508B Industrial Engines Water Lines
3508B Industrial Engines Flywheel
C1.5 and C2.2 Industrial Engines ECM Memory - Test
3500B Engines Water Lines
3500 Industrial Engines Air Cleaner
3508B Industrial Engines Turbocharger
2012/12/10 New Valve Lash Settings Are Used for C175 Engines {1102, 1121, 1123}
374F Excavator Joystick Controls
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Gas System
C280 Marine and Petroleum Engines Direct Fuel Control Mode - Test
2013/05/08 A New Shield and Seal Are Available for Certain Commercial Engines {1059, 7555}
C32 Auxiliary Engine Overhaul (Top End)
421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000} 421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000}
3508B Industrial Engines Aftercooler Water Lines
C1.5 and C2.2 Industrial Engines Valve Position Sensor - Test
3500 Industrial Engines Air Starting Motor
C13 Tier 4 Final Engines Gear Group (Rear)
390F Excavator Lifting Capacities
PM3516 Power Modules Coolant Level - Check
2013/01/03 Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
2012/12/13 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
Marine Multi-Station Control System Button Panel - Test
2012/12/21 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, and C15 Engines {1206}