Flywheel
Show/hide table
Illustration 1 | g03329265 |
Show/hide table
Specification for 379-4839 Flywheel Fastener | |||
Item | Qty | Part | Specification Description |
1 | 12 | 5P-8865 Bolt | Before assembly, lubricate the threads of the bolts with clean engine oil, molybdenum disulfide, or graphite base lubricant. |
Torque to |
Caterpillar Information System:
C1.5 and C2.2 Industrial Engines ECM Memory - Test
3500B Engines Water Lines
3500 Industrial Engines Air Cleaner
3508B Industrial Engines Turbocharger
2012/12/10 New Valve Lash Settings Are Used for C175 Engines {1102, 1121, 1123}
374F Excavator Joystick Controls
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Gas System
C280 Marine and Petroleum Engines Direct Fuel Control Mode - Test
2013/05/08 A New Shield and Seal Are Available for Certain Commercial Engines {1059, 7555}
C32 Auxiliary Engine Overhaul (Top End)
C18 Marine Engine Overhaul (Major)
2012/12/14 An Improved Valve Rotocoil (Rotator) is Used in C175 Engines {1100}
3508B Industrial Engines Water Lines
2012/12/14 New Software Is Used by Certain 3500C Locomotive Engines {1901, 1920}
421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000} 421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000}
3508B Industrial Engines Aftercooler Water Lines
C1.5 and C2.2 Industrial Engines Valve Position Sensor - Test
3500 Industrial Engines Air Starting Motor
C13 Tier 4 Final Engines Gear Group (Rear)
390F Excavator Lifting Capacities
PM3516 Power Modules Coolant Level - Check
2013/01/03 Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
2012/12/13 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}