Turbocharger
Show/hide table
Illustration 1 | g03329246 |
Show/hide table
Illustration 2 | g03329250 |
Bolt tightening sequence for 6V-6753 High Temperature Bolt (1) |
Show/hide table
Illustration 3 | g03329252 |
Bolt tightening sequence for 6V-6753 High Temperature Bolt (4) |
Show/hide table
Specification for 379-5328 Turbocharger Gp and 379-5312 Turbocharger Gp | |||
Item | Qty | Part | Specification Description |
1 | 8 | 6V-6753 High Temperature Bolt | Use the following procedure in order to tighten the bolts for the half flange: 1.Before assembly, lubricate the threads and bearing surfaces with Loctite C5A copper anti seize . 2.Tighten bolts 1 in any sequence to 3.Tighten bolts 2 in any sequence to |
2 | 1 | 9N-2038 Turbine Clamp As | Use the following procedure in order to tighten the clamp assemblies: 1. Tighten the clamp assemblies to 2. Gently tap around the clamp assemblies 3. Again, tighten the clamp assemblies |
3 | 1 | 4W-9977 Clamp As | |
4 | 8 | 6V-6753 High Temperature Bolt | Use the following procedure in order to tighten the bolts for the half flange: 1.Before assembly, lubricate the threads and bearing surfaces with Loctite C5A copper anti seize . 2.Tighten bolts 1 in any sequence to 3.Tighten bolts 2 in any sequence to |
5 | 8 | 2N-2765 High Temperature Bolt | Before assembly, lubricate the threads and bearing surfaces with Loctite C5A copper anti seize .
Torque to |
Caterpillar Information System:
2012/12/10 New Valve Lash Settings Are Used for C175 Engines {1102, 1121, 1123}
374F Excavator Joystick Controls
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Gas System
C280 Marine and Petroleum Engines Direct Fuel Control Mode - Test
2013/05/08 A New Shield and Seal Are Available for Certain Commercial Engines {1059, 7555}
C32 Auxiliary Engine Overhaul (Top End)
C18 Marine Engine Overhaul (Major)
2012/12/14 An Improved Valve Rotocoil (Rotator) is Used in C175 Engines {1100}
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620} Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
3508B Industrial Engines Exhaust Manifold
C280 Marine and Petroleum Engines Diagnostic Trouble Codes
C280 Marine and Petroleum Engines Event Codes
3500 Industrial Engines Air Cleaner
3500B Engines Water Lines
C1.5 and C2.2 Industrial Engines ECM Memory - Test
3508B Industrial Engines Flywheel
3508B Industrial Engines Water Lines
2012/12/14 New Software Is Used by Certain 3500C Locomotive Engines {1901, 1920}
421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000} 421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000}
3508B Industrial Engines Aftercooler Water Lines
C1.5 and C2.2 Industrial Engines Valve Position Sensor - Test
3500 Industrial Engines Air Starting Motor
C13 Tier 4 Final Engines Gear Group (Rear)
390F Excavator Lifting Capacities