3508B Industrial Engines Caterpillar


Exhaust Manifold

Usage:

3508B LDZ



Illustration 1g03328921

Typical example

Table 1
Specification for 381-4727 Exhaust Manifold Gp and 381-4730 Exhaust Manifold Gp    
Item     Qty     Part     Specification Description    
1     24     5P-2755 High Temperature Bolt     Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize.
Torque to
55 ± 5 N·m (41 ± 4 lb ft).    
2     32     9L-7373 High Temperature Bolt     Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize.
Torque to
50 ± 5 N·m (37 ± 4 lb ft).    

Caterpillar Information System:

C280 Marine and Petroleum Engines Diagnostic Trouble Codes
C280 Marine and Petroleum Engines Event Codes
C280 Marine and Petroleum Engines Fuel Pressure Is High
C280 Marine and Petroleum Engines Engine Shutdown Occurs Intermittently
C280 Marine and Petroleum Engines Oil Contains Coolant
C280 Marine and Petroleum Engines Fuel Consumption Is Excessive
C280 Marine and Petroleum Engines Engine Top Speed Is Not Obtained
C280 Marine and Petroleum Engines Engine Has Mechanical Noise (Knock)
C280 Marine and Petroleum Engines Engine Misfires, Runs Rough or Is Unstable
C280 Marine and Petroleum Engines Engine Has Early Wear
C32 Auxiliary Engine Heat Exchanger - Clean/Test
C280 Marine and Petroleum Engines Oil Consumption Is Excessive
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620} Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2012/12/14 An Improved Valve Rotocoil (Rotator) is Used in C175 Engines {1100}
C18 Marine Engine Overhaul (Major)
C32 Auxiliary Engine Overhaul (Top End)
2013/05/08 A New Shield and Seal Are Available for Certain Commercial Engines {1059, 7555}
C280 Marine and Petroleum Engines Direct Fuel Control Mode - Test
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Gas System
374F Excavator Joystick Controls
2012/12/10 New Valve Lash Settings Are Used for C175 Engines {1102, 1121, 1123}
3508B Industrial Engines Turbocharger
3500 Industrial Engines Air Cleaner
3500B Engines Water Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.