C13 Tier 4 Final Engines Caterpillar


Gear Group (Rear)

Usage:

730C2 2T4


Illustration 1g03329698


Illustration 2g03329719
Section of A-A

Table 1
Specification for 352-8469 Rear Gear Gp and 352-8470 Rear Gear Gp 
Item  Qty  Part  Specification Description 
147-3723 Idler Gear As  Before installation, outside diameter of 152-7254 Bushing is 88.989 ± 0.025 mm (3.5035 ± 0.0010 inch)
151-1339 Idler Gear As  Before installation, out side diameter of 152-7254 Bushing is 88.989 ± 0.025 mm (3.5035 ± 0.0010 inch)
6V-3349 O-Ring Seal  Before assembly, lubricate the bore lightly with the lubricant that is being sealed . 
271-7439 Pump Adapter  After installation, in the pump adapter bore of 160-8184 Bushing is 64.721 ± 0.053 mm (2.5480 ± 0.0020 inch)
Installation depth is 3.5 ± 0.5 mm (0.14 ± 0.02 inch).

Caterpillar Information System:

3500 Industrial Engines Air Starting Motor
C1.5 and C2.2 Industrial Engines Valve Position Sensor - Test
3508B Industrial Engines Aftercooler Water Lines
421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000} 421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000}
2012/12/14 New Software Is Used by Certain 3500C Locomotive Engines {1901, 1920}
3508B Industrial Engines Water Lines
3508B Industrial Engines Flywheel
C1.5 and C2.2 Industrial Engines ECM Memory - Test
3500B Engines Water Lines
3500 Industrial Engines Air Cleaner
3508B Industrial Engines Turbocharger
2012/12/10 New Valve Lash Settings Are Used for C175 Engines {1102, 1121, 1123}
390F Excavator Lifting Capacities
PM3516 Power Modules Coolant Level - Check
2013/01/03 Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
2012/12/13 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
Marine Multi-Station Control System Button Panel - Test
2012/12/21 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, and C15 Engines {1206}
PM3516 Power Modules Coolant (DEAC) - Change
PM3516 Power Modules Coolant (ELC) - Change
2012/12/10 3412 Marine Engine Overhaul Kits Are Available for Top End and Major Overhauls {1000}
374F Excavator Machine System Joystick Control
C13 Tier 4 Final Engines Gear Group (Rear)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.