Gear Group (Front)
Show/hide table
| |
| Illustration 1 | g03320461 |
Show/hide table
| Specification for 381-9088 Front Gear Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 112-9217 Thrust Plate | Install the thrust plate with the oil groove side towards the idler gear assembly.
Thickness is |
| 2 | 1 | 271-5661 Idler Gear As | After installation, bore in 128-2661 Bushing for drive idler shaft is |
| Installation depth (C) is |
|||
| 3 | 1 | 117-9712 Drive Idler Shaft | Diameter (B) of the new drive idler shaft is |
| 4 | 5 | 3G-2292 Locking Bolt | Torque to |
| 5 | 1 | 0S-1571 Bolt | Torque to |
Caterpillar Information System:
CG137-08 and CG137-12 Generator Sets Air Starting Motor
CG137-08 and CG137-12 Generator Sets Vibration Damper and Pulley
C1.5 and C2.2 Industrial Engines Engine Temperature Sensor Open or Short Circuit - Test
CG137-08 and CG137-12 Generator Sets Flywheel
CG137-08 and CG137-12 Generator Sets Engine Oil Pump
CG137-08 and CG137-12 Generator Sets Crankcase Breather
CG137-08 and CG137-12 Generator Sets Engine Oil Filter Base
CG137-08 and CG137-12 Generator Sets Turbocharger
CG137-08 and CG137-12 Generator Sets Valve Mechanism
CG137-08 and CG137-12 Generator Sets Valve Cover
CG137-08 and CG137-12 Generator Sets Gas Engine Ignition
CG137-08 and CG137-12 Generator Sets Air Cleaner
CG137-08 and CG137-12 Generator Sets Gear Group (Rear)
CG137-08 and CG137-12 Generator Sets Cylinder Head
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Air Shutoff - Test
Procedure for Installing Object Detection Software on Monitor Display Group {7347, 7490, 7620} Procedure for Installing Object Detection Software on Monitor Display Group {7347, 7490, 7620}
C32 Marine Engines Sensor Signal (Analog, Active) - Test
3516B Engine Exhaust Manifold - Remove and Install
C175-16 Locomotive Engine Fuel Rail Temperature Is High
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1961 - FMI 20
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1962 - FMI 20
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2813 - FMI 20
C32 Marine Engines Synchronization - Test
CG137-08 and CG137-12 Generator Sets Stub Shaft (Rear)