CG137-08 and CG137-12 Generator Sets Caterpillar


Vibration Damper and Pulley

Usage:

CG137-08 FPL


Illustration 1g03320868

Table 1
Specification for 381-9128 Damper and Pulley Gp 
Item  Qty  Part  Specification Description 
12  3D-0472 Taperlock Stud  Torque to 65 ± 10 N·m (48 ± 7 lb ft)
12  1F-7958 Full Nut  Torque to 135 ± 20 N·m (100 ± 15 lb ft)

Caterpillar Information System:

C1.5 and C2.2 Industrial Engines Engine Temperature Sensor Open or Short Circuit - Test
CG137-08 and CG137-12 Generator Sets Flywheel
CG137-08 and CG137-12 Generator Sets Engine Oil Pump
CG137-08 and CG137-12 Generator Sets Crankcase Breather
CG137-08 and CG137-12 Generator Sets Engine Oil Filter Base
CG137-08 and CG137-12 Generator Sets Turbocharger
CG137-08 and CG137-12 Generator Sets Valve Mechanism
CG137-08 and CG137-12 Generator Sets Valve Cover
CG137-08 and CG137-12 Generator Sets Gas Engine Ignition
CG137-08 and CG137-12 Generator Sets Air Cleaner
CG137-08 and CG137-12 Generator Sets Engine Oil Lines
CG137-08 and CG137-12 Generator Sets Camshaft
CG137-08 and CG137-12 Generator Sets Air Starting Motor
CG137-08 and CG137-12 Generator Sets Gear Group (Front)
CG137-08 and CG137-12 Generator Sets Gear Group (Rear)
CG137-08 and CG137-12 Generator Sets Cylinder Head
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Air Shutoff - Test
Procedure for Installing Object Detection Software on Monitor Display Group {7347, 7490, 7620} Procedure for Installing Object Detection Software on Monitor Display Group {7347, 7490, 7620}
C32 Marine Engines Sensor Signal (Analog, Active) - Test
3516B Engine Exhaust Manifold - Remove and Install
C175-16 Locomotive Engine Fuel Rail Temperature Is High
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1961 - FMI 20
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1962 - FMI 20
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 2813 - FMI 20
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.