Crankcase Breather
Show/hide table
Illustration 1 | g03320446 |
Show/hide table
Specification for 381-9097 Breather Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 6V-3831 O-Ring Seal | Before assembly, lubricate the bore lightly with the fluid that is being sealed. |
2 | 1 | 2N-8109 Clamp | Torque to |
Caterpillar Information System:
CG137-08 and CG137-12 Generator Sets Engine Oil Filter Base
CG137-08 and CG137-12 Generator Sets Turbocharger
CG137-08 and CG137-12 Generator Sets Valve Mechanism
CG137-08 and CG137-12 Generator Sets Valve Cover
CG137-08 and CG137-12 Generator Sets Gas Engine Ignition
CG137-08 and CG137-12 Generator Sets Air Cleaner
CG137-08 and CG137-12 Generator Sets Engine Oil Lines
CG137-08 and CG137-12 Generator Sets Camshaft
CG137-08 and CG137-12 Generator Sets Cylinder Block
CG137-08 and CG137-12 Generator Sets Water Pump
C175-16 Locomotive Engine Injector Solenoid - Test
C175-16 Locomotive Engine Fuel System Verification - Test
CG137-08 and CG137-12 Generator Sets Engine Oil Pump
CG137-08 and CG137-12 Generator Sets Flywheel
C1.5 and C2.2 Industrial Engines Engine Temperature Sensor Open or Short Circuit - Test
CG137-08 and CG137-12 Generator Sets Vibration Damper and Pulley
CG137-08 and CG137-12 Generator Sets Air Starting Motor
CG137-08 and CG137-12 Generator Sets Gear Group (Front)
CG137-08 and CG137-12 Generator Sets Gear Group (Rear)
CG137-08 and CG137-12 Generator Sets Cylinder Head
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Air Shutoff - Test
Procedure for Installing Object Detection Software on Monitor Display Group {7347, 7490, 7620} Procedure for Installing Object Detection Software on Monitor Display Group {7347, 7490, 7620}
C32 Marine Engines Sensor Signal (Analog, Active) - Test
3516B Engine Exhaust Manifold - Remove and Install