New Exhaust Shields and Seals Are Available for Certain On-Highway Truck Engines {1067}
- Engine:
- C-15 (S/N: MBN1-UP; 6NZ1-UP; 9NZ1-UP)
- C15 (S/N: SDP1-UP; BXS1-UP; MXS1-UP; NXS1-UP)
ReferenceSpecial Instruction, REHS7770, "Repair of Exhaust Shields on Certain C13 and C15 Engines"
New shields and seals are available for repair. The slip joint of the new shields help to prevent exhaust gas leakage. Also, The new seal material helps to prevent exhaust leakage.
Show/hide table
Part Number Table     | ||
Part Number     | Part Name     | Quantity     |
379-8578     | Shield As     | 2     |
380-5855     | Seal As     | 2     |
Caterpillar Information System:
C175-16 Generator Set Engine Engine Oil Cooler - Assemble
C175-16 Generator Set Engine Engine Oil Cooler - Disassemble
Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380} Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380}
C13, C15, and C18 Tier 4 Final Engines DEF Return Valve - Test
2012/10/23 A New Clamp is Now Used for the Air Lines Group on Certain Off-Highway Trucks and Quarry Trucks {1071, 1071}
C175-16 Generator Set Engine Engine Oil Cooler - Remove and Install
Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480} Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480}
C175-16 Generator Set Engine Auxiliary Water Pump - Assemble
C175-16 Generator Set Engine Auxiliary Water Pump - Disassemble
C175-16 Generator Set Engine Auxiliary Water Pump - Remove and Install
C175-16 Generator Set Engine Fuel and Auxiliary Water Pump Drive - Remove and Install
False Diagnostic Codes for Certain 3500B and 3500C Marine Engines{1901, 1920} False Diagnostic Codes for Certain 3500B and 3500C Marine Engines{1901, 1920}
C32 Marine Engines Bearing Clearance - Check
C175-16 Generator Set Engine Engine Oil Pump - Remove and Install
C175-16 Generator Set Engine Engine Oil Pump - Disassemble
2012/10/04 A New Unit Injector Wiring Group Is Used on Certain C9.3 Industrial Engines {1290, 1408, 1900}
2012/11/09 A New Canadian Standards Association (CSA) Ignition Harness Is Used by Certain G3406 Engines {1408}
C175-16 Generator Set Engine Engine Oil Pump - Assemble
C175-16 Generator Set Engine Engine Oil Filter Housing - Remove and Install
C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Remove and Install
2012/10/22 A New Coolant Pressure Sensor Is Used on C175-16 Petroleum Engines {1439, 1439, 191W}
C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Disassemble
C32 Marine Engines Heat Exchanger - Remove and Install
G3520E Generator Set Engines Cylinder Block