Engine Oil Cooler - Assemble
- Position the gaskets and bonnet (12). Install bolts (11).
Show/hide table
Illustration 2 g02022463 - Position the O-ring seals and elbow (10). Install bolts (9).
Show/hide table
Illustration 3 g02022459 - Position the O-ring seals and elbow (4). Install bolts (3). Position the O-ring seals and elbow (1). Install bolts (2). Install bypass valve (5) and spring (6). Install O-ring seal (7) and plug (8).
Show/hide table
Illustration 1 | g02022465 |
End By:
- Install the engine oil cooler.
Caterpillar Information System:
C175-16 Generator Set Engine Engine Oil Cooler - Disassemble
Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380} Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380}
C13, C15, and C18 Tier 4 Final Engines DEF Return Valve - Test
2012/10/23 A New Clamp is Now Used for the Air Lines Group on Certain Off-Highway Trucks and Quarry Trucks {1071, 1071}
C175-16 Generator Set Engine Engine Oil Cooler - Remove and Install
Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480} Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480}
C175-16 Generator Set Engine Auxiliary Water Pump - Assemble
C175-16 Generator Set Engine Auxiliary Water Pump - Disassemble
C175-16 Generator Set Engine Auxiliary Water Pump - Remove and Install
C175-16 Generator Set Engine Fuel and Auxiliary Water Pump Drive - Remove and Install
False Diagnostic Codes for Certain 3500B and 3500C Marine Engines{1901, 1920} False Diagnostic Codes for Certain 3500B and 3500C Marine Engines{1901, 1920}
2012/10/26 A New Support for the Air Lines Is Used on C175-16 Generator Set Engines {1071}
2012/10/04 New Exhaust Shields and Seals Are Available for Certain On-Highway Truck Engines {1067}
C32 Marine Engines Bearing Clearance - Check
C175-16 Generator Set Engine Engine Oil Pump - Remove and Install
C175-16 Generator Set Engine Engine Oil Pump - Disassemble
2012/10/04 A New Unit Injector Wiring Group Is Used on Certain C9.3 Industrial Engines {1290, 1408, 1900}
2012/11/09 A New Canadian Standards Association (CSA) Ignition Harness Is Used by Certain G3406 Engines {1408}
C175-16 Generator Set Engine Engine Oil Pump - Assemble
C175-16 Generator Set Engine Engine Oil Filter Housing - Remove and Install
C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Remove and Install
2012/10/22 A New Coolant Pressure Sensor Is Used on C175-16 Petroleum Engines {1439, 1439, 191W}
C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Disassemble
C32 Marine Engines Heat Exchanger - Remove and Install