Engine Oil Cooler - Disassemble
Start By:
- Remove the engine oil cooler.
- Remove plug (8) and O-ring seal (7). Remove spring (6) and bypass valve (5). Remove bolts (2). Remove elbow (1) and the O-ring seals. Remove bolts (3), elbow (4), and the O-ring seals.
Show/hide table
Illustration 2 g02022463 - Remove bolts (9). Remove elbow (10) and the O-ring seals. Repeat for the opposite side.
Show/hide table
Illustration 3 g02022465 - Remove bolts (11). Remove bonnet (12) and the gaskets. Repeat for the opposite side.
Note: Note the orientation of the elbow for assembly purposes.
Show/hide table
Illustration 1 | g02022459 |
Caterpillar Information System:
Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380} Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380}
C13, C15, and C18 Tier 4 Final Engines DEF Return Valve - Test
2012/10/23 A New Clamp is Now Used for the Air Lines Group on Certain Off-Highway Trucks and Quarry Trucks {1071, 1071}
C175-16 Generator Set Engine Engine Oil Cooler - Remove and Install
Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480} Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480}
C175-16 Generator Set Engine Auxiliary Water Pump - Assemble
C175-16 Generator Set Engine Auxiliary Water Pump - Disassemble
C175-16 Generator Set Engine Auxiliary Water Pump - Remove and Install
C175-16 Generator Set Engine Fuel and Auxiliary Water Pump Drive - Remove and Install
False Diagnostic Codes for Certain 3500B and 3500C Marine Engines{1901, 1920} False Diagnostic Codes for Certain 3500B and 3500C Marine Engines{1901, 1920}
2012/10/26 A New Support for the Air Lines Is Used on C175-16 Generator Set Engines {1071}
C175-16 Generator Set Engine Water Pump - Assemble
C175-16 Generator Set Engine Engine Oil Cooler - Assemble
2012/10/04 New Exhaust Shields and Seals Are Available for Certain On-Highway Truck Engines {1067}
C32 Marine Engines Bearing Clearance - Check
C175-16 Generator Set Engine Engine Oil Pump - Remove and Install
C175-16 Generator Set Engine Engine Oil Pump - Disassemble
2012/10/04 A New Unit Injector Wiring Group Is Used on Certain C9.3 Industrial Engines {1290, 1408, 1900}
2012/11/09 A New Canadian Standards Association (CSA) Ignition Harness Is Used by Certain G3406 Engines {1408}
C175-16 Generator Set Engine Engine Oil Pump - Assemble
C175-16 Generator Set Engine Engine Oil Filter Housing - Remove and Install
C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Remove and Install
2012/10/22 A New Coolant Pressure Sensor Is Used on C175-16 Petroleum Engines {1439, 1439, 191W}
C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Disassemble