Auxiliary Water Pump - Disassemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-9895 | Crossblock | 1 |
| 1P-0820 | Hydraulic Puller | 1 | |
| 126-7181 | Sliding Plate | 2 | |
| 3H-0465 | Push-Puller Plate | 6 | |
| 2S-4680 | Stud | 2 | |
| 3S-6224 | Electric Hydraulic Pump Gp | 1 | |
| 2L-4523 | Bolt | 2 | |
| 5P-8244 | Hard Washer | 2 | |
| 6B-6682 | Full Nut | 2 | |
| 2J-3506 | Full Nut | 2 | |
Start By:
- Remove the auxiliary water pump.
- Remove nuts (1). Remove cover (2) from water pump (3).
Show/hide table
Illustration 2 g01204935 - Remove O-ring seal (4) from cover (2).
Show/hide table
Illustration 3 g01207677 Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Use Tooling (A) in order to remove impeller (5).
Show/hide table
Illustration 4 g01207678 - Remove spring (6).
Show/hide table
Illustration 5 g01207696 - Turn over water pump (3). Remove bolts (8). Remove shaft (7) and thrust washer (9). When you remove shaft (7) the seal ring will be free from shaft (7).
Show/hide table
Illustration 6 g01207698 - Remove seal (10) and ring assembly (11).
Show/hide table
Illustration 7 g01207700 - Turn over water pump (3). Remove the rubber seal and the ceramic ring of seal group (12).
Show/hide table
| |
| Illustration 1 | g01204934 |
Caterpillar Information System:
C175-16 Generator Set Engine Auxiliary Water Pump - Remove and Install
C175-16 Generator Set Engine Fuel and Auxiliary Water Pump Drive - Remove and Install
False Diagnostic Codes for Certain 3500B and 3500C Marine Engines{1901, 1920} False Diagnostic Codes for Certain 3500B and 3500C Marine Engines{1901, 1920}
2012/10/26 A New Support for the Air Lines Is Used on C175-16 Generator Set Engines {1071}
C175-16 Generator Set Engine Water Pump - Assemble
C175-16 Generator Set Engine Water Pump - Disassemble
C32 Marine Engines Crankshaft - Install
C32 Marine Engines Crankshaft - Remove
C32 Marine Engines Crankshaft Main Bearings - Install
C32 Marine Engines Crankshaft Main Bearings - Remove
C32 Marine Engines Connecting Rod Bearings - Install
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks System Overview
C175-16 Generator Set Engine Auxiliary Water Pump - Assemble
Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480} Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480}
C175-16 Generator Set Engine Engine Oil Cooler - Remove and Install
2012/10/23 A New Clamp is Now Used for the Air Lines Group on Certain Off-Highway Trucks and Quarry Trucks {1071, 1071}
C13, C15, and C18 Tier 4 Final Engines DEF Return Valve - Test
Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380} Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380}
C175-16 Generator Set Engine Engine Oil Cooler - Disassemble
C175-16 Generator Set Engine Engine Oil Cooler - Assemble
2012/10/04 New Exhaust Shields and Seals Are Available for Certain On-Highway Truck Engines {1067}
C32 Marine Engines Bearing Clearance - Check
C175-16 Generator Set Engine Engine Oil Pump - Remove and Install
C175-16 Generator Set Engine Engine Oil Pump - Disassemble