1988/02/01 Caterpillar


CXP Fluids Available From Caterpillar Inc.

Usage:


Reference: Truck Engine News, November, 1986; Page 4, "Caterpillar Antifreeze Now Used And Available From Parts Department. "

A test market program of CXP fluids has been completed, and plans are underway to offer the entire line of products to dealers worldwide. The CXP product line includes engine oils for diesel and gasoline engines, and arctic lubricants, greases, and antifreeze (antifreeze was announced in the Reference Article). The product line will be expanded as demand indicates the need for additional products.

The decision to provide petroleum products through Caterpillar dealers has resulted from worldwide technical demands. Lubricant-related failures and limits on engine life due to the current lubricating oils offered in the industry have created a need for high quality and high performance lubricants that are not readily available throughout the world. Caterpillar intends to offer these lubricants so all Caterpillar Truck Engine owners will get the maximum life and performance that has been designed into all Caterpillar engines.

The CXP Diesel Engine Oil was developed on new Caterpillar performance test equipment, and tested on Caterpillar OL5 and OL6 engine tests. The formulation for the CXP Diesel Engine Oil was selected because of its superior performance in achieving excellent engine cleanliness, maintaining excellent oil control, and offering very stable oil deterioration characteristics. All these factors will give longer life to all Caterpillar Diesel Engines.

All other CXP products are high quality lubricants meeting rigid quality standards. Lubricating oils currently used at the factories are being changed to CXP products, and will be used worldwide for the factory fill as soon as possible. Most CXP products will be offered in one gallon, five gallon, 55 gallon, or bulk quantities in the U.S. Other countries will offer these products in four Liter, 20 Liter, 205 Liter, or bulk quantities.

When the CXP products become more widely available, the lubricant recommendations in the service publications will be changed. CXP lubricants will be recommended for all Caterpillar Truck Engines to achieve maximum life and performance. Also indicated will be oil industry classifications that can be used if the CXP products are not available.

Caterpillar fully expects increased life and performance for all its equipment by using these CXP products. Someone will be contacting you regarding the use and implementation of CXP fluids.

Caterpillar Information System:

1988/02/01 Fluid Sampling Tools For Non-Pressurized Compartments
1988/02/01 New 1U8271 Timing Advance Holding Tool Available
1988/02/01 Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates
1988/02/01 Servicing And Programming PEEC Truck Engines Equipped With Kysor ® Shutdown System
1988/01/01 New Engine Oil Coolers Have Rubber End Sheets
1988/01/01 8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01 Die Cast Flywheel Housing Has Less Weight
1988/01/01 New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups
1987/12/01 List of Service Publications
1987/12/01 Adjust Bosch Solenoid If Replaced Or Reinstalled
1987/12/01 Earlier Flywheel Housings Can Be Modified For Use With Later Crankshafts
1987/12/01 New 1U5803 Connector Repair Kit Available
1988/03/01 New Publication Available-"Diesel Fuels And Your Engine "
1988/03/01 Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01 New 1U6602 Tachometer Group Available
1988/03/01 Updated 8C5919 3406B PEEC Service Program Module Available
1988/03/01 Updated Executive Program Module Available For The 8T8697 Electronic Control Analyzer Programmer (ECAP)
1988/04/01 Former Exhaust Valve Bridge For Jacobs Brake ® Interferes With 40 mm Nozzle Adapter; New Bridge Used
1988/04/01 Stepped Compression Ring Temporarily Used
1988/04/01 Extraction Tools For "Live Oil Sampling "
1988/04/01 List of Service Publications
1988/04/01 Remanufactured Cylinder Heads For 3406 Engines
1988/05/01 Ways To Prevent Overcooling Of 3306B (63Z, 76R) Truck Engines
1988/05/01 New Components Used In Water Lines Groups
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.