8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
Usage:
Truck Engines Equipped With Delco Alternators
The 8T5314 Socket Adapter is available to correctly install the pulley nut on 6N9294 (35 amp) and 5S9088 (50 amp) Alternators (Delco). The 8T5314 Socket Adapter is needed because the pulley retaining nut is completely enclosed within the counterbore of the pulley. If the pulley is not correctly secured, the pulley can slip on the rotor shaft. This could result in a loss of electrical charging and damage to the rotor shaft. The illustration shows the tool arrangement, including the 8T5314 Socket Adapter, used to correctly install the pulley nut.
Tool arrangement for correctly installing alternator pulley nut.
Caterpillar Information System:
1988/01/01 Die Cast Flywheel Housing Has Less Weight
1988/01/01 New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups
1987/12/01 List of Service Publications
1987/12/01 Adjust Bosch Solenoid If Replaced Or Reinstalled
1987/12/01 Earlier Flywheel Housings Can Be Modified For Use With Later Crankshafts
1987/12/01 New 1U5803 Connector Repair Kit Available
1987/12/01 Improved Valve Mechanism Cover Groups
1987/12/01 Oil Pan Size Identification
1987/12/01 Engine Oil Refill Capacity Reduced
1987/11/01 Intake Valve Seals Used
1987/11/01 Additional Parts Required For Installation Of C-336 ® Jacobs Engine Brake
1987/11/01 Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1988/01/01 New Engine Oil Coolers Have Rubber End Sheets
1988/02/01 Servicing And Programming PEEC Truck Engines Equipped With Kysor ® Shutdown System
1988/02/01 Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates
1988/02/01 New 1U8271 Timing Advance Holding Tool Available
1988/02/01 Fluid Sampling Tools For Non-Pressurized Compartments
1988/02/01 CXP Fluids Available From Caterpillar Inc.
1988/03/01 New Publication Available-"Diesel Fuels And Your Engine "
1988/03/01 Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01 New 1U6602 Tachometer Group Available
1988/03/01 Updated 8C5919 3406B PEEC Service Program Module Available
1988/03/01 Updated Executive Program Module Available For The 8T8697 Electronic Control Analyzer Programmer (ECAP)
1988/04/01 Former Exhaust Valve Bridge For Jacobs Brake ® Interferes With 40 mm Nozzle Adapter; New Bridge Used