3500B Engines for Caterpillar Built Power Modules Caterpillar


Engine Oil Filter

Usage:

PM3508 BLM


Illustration 1g03093056

Table 1
Specification for 4W-6874 Engine Oil Filter Gp, 319-2130 Engine Oil Filter Gp and 319-2131 Engine Oil Filter Gp 
Item  Qty  Part  Specification Description 
6V-5048 O-Ring Seal  Lubricate the bore lightly with clean engine oil. 
2W-1635 Spring  Length under test force is 102.0 mm (4.02 inch).
Test force is 518 ± 26 N (117 ± 6 lb).
Free length after test force is 143.4 mm (5.65 inch)
2W-1969 Bypass Valve  Valve must move freely in bore. 
Start to open pressure is 287 ± 7 kPa (42 ± 1 psi).
Fully open pressure is 480 ± 7 kPa (70 ± 1 psi).
165-3931 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft)
0L-1143 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft)

Caterpillar Information System:

3500B Engines for Caterpillar Built Power Modules Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Install
3516B Engine Engine Oil Level - Check
797F and 797F XQ Off-Highway Trucks Machine Systems Radiator Grill - Remove and Install
3500 Industrial Engines Engine Oil Pan
3500C Marine Engines Turbocharger Oil Lines
3516B Engine Refill Capacities
3516B Engine Plate Locations and Film Locations
797F and 797F XQ Off-Highway Trucks Machine Systems Engine Shutdown Switch and Disconnect Switch - Remove and Install
3516B Engine Product Description
2014/03/07 New Exhaust Elbows and Bellows Are Used for the Turbine Inlets on Certain G3516B and G3520B Engines {1052, 1059}
C7.1 Industrial Engine Turbocharger - Inspect
3512B and 3512C Petroleum Generator Set Engines Crankcase Breather
C7.1 Engines Clean Emissions Module Has High Oxygen Level
C7.1 Industrial Engine Walk-Around Inspection
2012/10/11 New Clamp for Fuel Injection Lines on C6.6 Machine Engines {1251, 1290, 7553}
3500 Generator Set Engines Engine Oil Lines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215} Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
3500C Marine Engines Fan Drive
C7.1 Industrial Engine Reference Material
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Disassemble - Type 2
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Assemble - Type 2
2012/07/02 Precious Metals Engine Rebuild Kits Are Available for 3306 Machine Engines {1000}
2012/06/19 Cat Electronic Technician (ET) has An Improved Fuel Filter Intake Pressure Display for C175-16 Generator Set Engines {1260, 1261}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.