Radiator Grill - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 138-7574 | 连杆支架 | 2 |
开始:
- 拆下扶梯。
- 拆下底部护罩。
- 如果配备有抑噪配置，则请参阅专门说明书, " 351-3820 抑噪配置（如有配备）的安装"，了解专用面板位置和正确的拆卸或安装步骤。
- 释放空气系统压力。 请参阅操作和保养手册, "系统压力释放"。
- 将适当的起吊设备固定到支架 (1) 上。 拆下螺栓 (2 ) 。 拆下托架组件 (1) 和物体侦测系统 (3) 。
Show/hide table
 | |
| 图 1 | g03091698 |
- 断开管组件 (4) 。
Show/hide table
 | |
| 图 2 | g03092323 |
- 断开线束组件 (5) 。 拆下螺栓 (6) 和喇叭组件 (7) 。 将管组件 (4) 和线束组件 (5) 放到一边。
Show/hide table
 | |
| 图 3 | g03092327 |
- 断开线束组件 (8) 。 拆下夹子 (9) 。
Show/hide table
 | |
| 图 4 | g03092339 |
- 断开线束组件 (10) 。
Show/hide table
 | |
| 图 5 | g03092630 |
- 将工具 (A) 和适当的起吊设备连接到散热器格栅组件 (11) 上。 散热器格栅组件 (11) 的重量约为 1951 kg (4300 lb)。
Show/hide table
 | |
| 图 6 | g03092516 |
- 将开口销 (12) 和销 (13) 从连杆 (14) 上拆下。 对于另一侧，重复本步骤。
Show/hide table
 | |
| 图 7 | g03092642 |
- 拆下螺栓 (15) 和螺栓 (16) 。
Show/hide table
 | |
| 图 8 | g03092643 |
Show/hide table
 | |
| 图 9 | g03092645 |
- 拆下螺栓 (17) 。 对于另一侧，重复本步骤。
Show/hide table
 | |
| 图 10 | g03092647 |
- 拆下散热器格栅组件 (11) 。
Show/hide table
 | |
| 图 11 | g03092656 |
安装步骤
- 按与拆卸相反的顺序安装散热器格栅组件 (11) 。
Caterpillar Information System:
3500 Industrial Engines Engine Oil Pan
3500C Marine Engines Turbocharger Oil Lines
3516B Engine Refill Capacities
3516B Engine Plate Locations and Film Locations
797F and 797F XQ Off-Highway Trucks Machine Systems Engine Shutdown Switch and Disconnect Switch - Remove and Install
3516B Engine Product Description
2014/03/07 New Exhaust Elbows and Bellows Are Used for the Turbine Inlets on Certain G3516B and G3520B Engines {1052, 1059}
C7.1 Industrial Engine Turbocharger - Inspect
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Rear) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Front) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Ladder - Remove and Install
3516B Engine Model View Illustrations
3516B Engine Engine Oil Level - Check
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Install
3500B Engines for Caterpillar Built Power Modules Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
3500B Engines for Caterpillar Built Power Modules Engine Oil Filter
3512B and 3512C Petroleum Generator Set Engines Crankcase Breather
C7.1 Engines Clean Emissions Module Has High Oxygen Level
C7.1 Industrial Engine Walk-Around Inspection
2012/10/11 New Clamp for Fuel Injection Lines on C6.6 Machine Engines {1251, 1290, 7553}
3500 Generator Set Engines Engine Oil Lines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215} Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
3500C Marine Engines Fan Drive
C7.1 Industrial Engine Reference Material