Engine Oil Pan
Show/hide table
| |
| 图 1 | g03093076 |
|
俯视图 | |
Show/hide table
| 技术规格 - 7C-4711 油底壳总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 3P-0654 O 形密封圈 | 组装前，涂抹 1P-0808 多功能润滑脂以润滑孔。 |
| 2 | 2 | 7X-1547 O 形密封圈 | 组装前，涂抹 1P-0808 多功能润滑脂以润滑孔。 |
| 3 | 2 | 0S-1590 螺栓 | 为了防止管组件 (5) 出现应力，组装期间采用下列拧紧步骤：
1. 将两个螺栓 (4) 拧紧至 2. 然后，再将两个螺栓 (3) 拧紧至 |
| 4 | 2 | 0S-1588 螺栓 | |
| 6 | 2 | 4B-2363 机油排放塞 | 拧紧至扭矩为 |
| 7 | - | - | 根据需要，在垫片的接头上涂抹 Loctite RTV 透明硅胶、Permatex No # 2 或红色 Loctite High Tack GS S。 |
Caterpillar Information System:
3500C Marine Engines Turbocharger Oil Lines
3516B Engine Refill Capacities
3516B Engine Plate Locations and Film Locations
797F and 797F XQ Off-Highway Trucks Machine Systems Engine Shutdown Switch and Disconnect Switch - Remove and Install
3516B Engine Product Description
2014/03/07 New Exhaust Elbows and Bellows Are Used for the Turbine Inlets on Certain G3516B and G3520B Engines {1052, 1059}
C7.1 Industrial Engine Turbocharger - Inspect
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Rear) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Front) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Ladder - Remove and Install
3516B Engine Model View Illustrations
3500B High Displacement Turbocharger Oil Lines
797F and 797F XQ Off-Highway Trucks Machine Systems Radiator Grill - Remove and Install
3516B Engine Engine Oil Level - Check
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Install
3500B Engines for Caterpillar Built Power Modules Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
3500B Engines for Caterpillar Built Power Modules Engine Oil Filter
3512B and 3512C Petroleum Generator Set Engines Crankcase Breather
C7.1 Engines Clean Emissions Module Has High Oxygen Level
C7.1 Industrial Engine Walk-Around Inspection
2012/10/11 New Clamp for Fuel Injection Lines on C6.6 Machine Engines {1251, 1290, 7553}
3500 Generator Set Engines Engine Oil Lines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215} Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
3500C Marine Engines Fan Drive