Engine Oil Lines
Show/hide table
 | |
| Illustration 1 | g03093679 |
Typical example | |
Show/hide table
| Specification for 4W-6062 Engine Oil Lines Gp and 261-2330 Engine Oil Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 0S-1571 Bolt | Use the following sequence to tightening the clamp bolts: 1. Snugly tighten the clamp assembly (2) to the tube (6). 2. Tighten the clamp assembly (2) to the elbow (7). 3. Tighten the clamp assembly (2) to the tube (6). |
| 3 | 2 | 0S-1594 Bolt | |
| 4 | 6 | 109-2332 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed |
| 5 | 1 | 2W-1053 Plug | Torque to 100 ± 15 N·m (74 ± 11 lb ft). |
Caterpillar Information System:
2012/10/11 New Clamp for Fuel Injection Lines on C6.6 Machine Engines {1251, 1290, 7553}
C7.1 Industrial Engine Walk-Around Inspection
C7.1 Engines Clean Emissions Module Has High Oxygen Level
3512B and 3512C Petroleum Generator Set Engines Crankcase Breather
3500B Engines for Caterpillar Built Power Modules Engine Oil Filter
3500B Engines for Caterpillar Built Power Modules Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Install
3516B Engine Engine Oil Level - Check
797F and 797F XQ Off-Highway Trucks Machine Systems Radiator Grill - Remove and Install
3500 Industrial Engines Engine Oil Pan
3500C Marine Engines Turbocharger Oil Lines
3516B Engine Refill Capacities
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215} Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
3500C Marine Engines Fan Drive
C7.1 Industrial Engine Reference Material
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Disassemble - Type 2
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Assemble - Type 2
2012/07/02 Precious Metals Engine Rebuild Kits Are Available for 3306 Machine Engines {1000}
2012/06/19 Cat Electronic Technician (ET) has An Improved Fuel Filter Intake Pressure Display for C175-16 Generator Set Engines {1260, 1261}
Rework Procedure For Digital Input Wiring On Certain Generator Sets{4490} Rework Procedure For Digital Input Wiring On Certain Generator Sets{4490}
2012/10/22 A New Jacket Water Line Flange and Ring are Used on Certain C175 Engines {1380}
2012/10/22 An Improved Water Line Support Bracket is Used on Certain C175 Engines {1063, 1380}
UPSB505 Uninterruptible Power Supply General Hazard Information
3500C Marine Engines Configuration Parameters