Refill Capacities
发动机润滑系统的容量包括工厂安装的机油滤清器的容量。 辅助机油滤清器系统（如有配备）需要额外的机油。 参考由辅助机油滤清器系统 OEM（原设备制造厂家）提供的使用说明。
请参阅本操作与保养手册 , "油液建议" 主题以了解建议使用的机油。
Show/hide table
| |
| 图 1 | g02872482 |
|
标准油底壳 | |
Show/hide table
| |
| 图 2 | g02872485 |
|
深油底壳 | |
Show/hide table
| 3512 发动机润滑系统的近似加注容量 | ||
|---|---|---|
| 腔室或系统 | 升 | 美加仑 |
| 标准油底壳 | |
84 US gal |
| 深油底壳 | |
165 US gal |
Show/hide table
| 3516 发动机润滑系统的近似加注容量 | ||
|---|---|---|
| 腔室或系统 | 升 | 美加仑 |
| 标准油底壳 | |
107 US gal |
| 深油底壳 | |
213 US gal |
为了正确保养冷却系统，必须确定冷却系统总容量。 冷却系统的总容量将随安装的设备不同而变化。 冷却系统的总容量可包括以下部件： 发动机, 膨胀箱 , 热交换器 , 散热器, 龙骨冷却器 和 管道。
参考由 Caterpillar或安装设备的原始设备制造商（OEM）提供的规范。 在下列表格中记录冷却系统的总容量。
Show/hide table
| 3512 发动机冷却系统的近似加注容量 | ||
|---|---|---|
| 腔室或系统 | 升 | 美加仑 |
| 发动机本身 | 160 L | 42 US gal |
| 外部系统 | ||
| 冷却系统总容量 | ||
Show/hide table
| 3516 发动机冷却系统的近似加注容量 | ||
|---|---|---|
| 腔室或系统 | 升 | 美加仑 |
| 发动机本身 | 235 L | 62 US gal |
| 外部系统 | ||
| 冷却系统总容量 | ||
Caterpillar Information System:
Product Identification Numbers (PIN) Location Guide Integrated Toolcarrier
C175-16 Marine Propulsion Engines Fuel Priming Pump - Test
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0718 - FMI 13
3516B Generator Set Engines with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
C175-16 Marine Propulsion Engines Fuel Control - Test
Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F} Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F}
C175-16 Locomotive Engine Flywheel
C175-16 Marine Propulsion Engines Auxiliary Water Pump
C175-16 and C175-20 Generator Set Engines Camshaft
C175-16 Marine Propulsion Engines Water Pump
C175-16 Marine Propulsion Engines Engine Oil Pan
C7 Petroleum Engine Grounding Stud - Inspect/Clean/Tighten
2012/02/27 A New Improved Torque Converter Inlet Tube is Used with TH55 FT-E70 Petroleum Transmission {3101, 3103}
3512C and 3516C Marine Auxiliary Engines Electrical Connectors
C175-16 Marine Propulsion Engines Indicator Lamp - Test
3512B and 3512C Petroleum Generator Set Engines Configuration Parameters
3512B and 3512C Petroleum Generator Set Engines Diagnostic Trouble Codes
3512B and 3512C Petroleum Generator Set Engines Event Codes
C175-16 Marine Engine Flywheel
3512C and 3516C Marine Auxiliary Engines Component Location
3512C and 3516C Marine Auxiliary and Generator Set Engines Aftercooler Core - Inspect/Clean/Test
3512C and 3516C Marine Auxiliary Engines Electronic Display Module
2012/06/12 New Adapters Are Now Available to Replace Shutoff Valves for the Cab Heater Lines on Certain 324D to 390D and 324E to 349E Excavators and Mobile Hydraulic Power Units {1808}
C175-16 Marine Propulsion Engines Injector Solenoid - Test