C175-16 Marine Propulsion Engines Caterpillar


Engine Oil Pan

Usage:

C175-16 M6A


Illustration 1g02873676

Table 1
Specification for 344-7322 Oil Pan Gp 
Item  Qty  Part  Specification Description 
6V-3835 O-Ring Seal  Lubricate the bore lightly with 5P-3975 Rubber Lubricant. 
Apply Loctite RTV Silicone sealant to the following locations:
Apply sealant to each joint of the oil pan seal assembly.
Connecting joint of the front housing and the front of the cylinder block.
Connecting joint of the flywheel housing and the rear of the cylinder block.
At the T-joint location the bead should cover the entire span. 


Illustration 2g02873677

Table 2
Item  Qty  Part  Specification Description 
269-7886 O-Ring Seal  Lubricate the bore lightly with 5P-3975 Rubber Lubricant. 

Caterpillar Information System:

C7 Petroleum Engine Grounding Stud - Inspect/Clean/Tighten
C7 Petroleum Engine Engine Valve Lash - Check
3516C Industrial Engine Engine Oil and Filter - Change
C13, C15, and C18 Tier 4 Final Engines Timing - Calibrate
3516C Industrial Engine Refill Capacities
C13, C15, and C18 Tier 4 Final Engines Cooling Fan - Calibrate
C9.3 Tier 4 Final Engines Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Final Engines ECM - Replace
C13, C15, and C18 Tier 4 Final Engines ECM Software - Install
C13, C15, and C18 Tier 4 Final Engines Injector Trim File - Install
3512C HD SR500 Generator Sets Coolant Extender (ELC) - Add
C13, C15, and C18 Tier 4 Final Engines Test ECM Mode
C175-16 Marine Propulsion Engines Water Pump
C175-16 and C175-20 Generator Set Engines Camshaft
C175-16 Marine Propulsion Engines Auxiliary Water Pump
C175-16 Locomotive Engine Flywheel
Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F} Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F}
C175-16 Marine Propulsion Engines Fuel Control - Test
3516B Generator Set Engines with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0718 - FMI 13
C175-16 Marine Propulsion Engines Fuel Priming Pump - Test
Product Identification Numbers (PIN) Location Guide Integrated Toolcarrier
3512C and 3516C Marine Auxiliary and Generator Set Engines Refill Capacities
2012/02/27 A New Improved Torque Converter Inlet Tube is Used with TH55 FT-E70 Petroleum Transmission {3101, 3103}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.