3516C Industrial Engine Caterpillar


Refill Capacities

Usage:

3516C MLF

Lubrication System

The capacity of the lubrication system includes the capacity of the oil filters that are installed at the factory.

Auxiliary oil filter systems (if equipped) will require additional oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.

For the recommended oil, see this Operation and Maintenance Manual, "Fluid Recommendations" topic.



Illustration 1g02872482
Standard oil pan


Illustration 2g02872485
Deep oil pan

3512C Engines

Table 1
Approximate Refill Capacities for 3512C Engine Lubrication Systems 
Compartment or System  Liters  US Gallons 
Standard sump  318 L  84 US gal 
Deep sump  625 L  165 US gal 

3516C Engines

Table 2
Approximate Refill Capacities for 3516C Engine Lubrication Systems 
Compartment or System  Liters  US Gallons 
Deep sump  807 L  213 US gal 

Cooling System

To maintain the cooling system properly, the total capacity of the cooling system must be determined. The capacity of the total cooling system will vary between individual installations. The external system can include the following components: expansion tank, radiator and piping. Refer to the specifications that are provided by the OEM. Record the total cooling system capacity in the appropriate Table.

For the recommended coolant, see this Operation and Maintenance Manual, "Fluid Recommendations" topic.

3512C Engines

Table 3
Approximate Refill Capacities for the 3512C Engine Cooling Systems with Separate Circuit Aftercooling 
Compartment or System  Liters  US Gallons 
Engine plus jacket water system  260 L  69 US gal 
Engine plus jacket water system plus separate circuit aftercooler  291 L  77 US gal 

3516C Engines

Table 4
Approximate Refill Capacities for the 3516C Engine Cooling Systems with Separate Circuit Aftercooling 
Compartment or System  Liters  US Gallons 
Engine plus jacket water system  305 L  81 US gal 
Engine plus jacket water system plus separate circuit aftercooler  352 L  93 US gal 

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Cooling Fan - Calibrate
C9.3 Tier 4 Final Engines Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Final Engines ECM - Replace
C13, C15, and C18 Tier 4 Final Engines ECM Software - Install
C13, C15, and C18 Tier 4 Final Engines Injector Trim File - Install
3512C HD SR500 Generator Sets Coolant Extender (ELC) - Add
C13, C15, and C18 Tier 4 Final Engines Test ECM Mode
C13, C15, and C18 Tier 4 Final Engines ECM Will Not Accept Factory Passwords
C13, C15, and C18 Tier 4 Final Engines Factory Passwords
C7 Petroleum Engine Coolant (ELC) - Change
3516B Generator Set Engines with Dynamic Gas Blending Customer Passwords
C175-16 Marine Engine Alternator
C13, C15, and C18 Tier 4 Final Engines Timing - Calibrate
3516C Industrial Engine Engine Oil and Filter - Change
C7 Petroleum Engine Engine Valve Lash - Check
C7 Petroleum Engine Grounding Stud - Inspect/Clean/Tighten
C175-16 Marine Propulsion Engines Engine Oil Pan
C175-16 Marine Propulsion Engines Water Pump
C175-16 and C175-20 Generator Set Engines Camshaft
C175-16 Marine Propulsion Engines Auxiliary Water Pump
C175-16 Locomotive Engine Flywheel
Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F} Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F}
C175-16 Marine Propulsion Engines Fuel Control - Test
3516B Generator Set Engines with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.