Auxiliary Water Pump
Show/hide table
| |
| Illustration 1 | g02873916 |
Show/hide table
| Specification for 248-4130 Auxiliary Water Pump Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | - | - | Tighten the setscrews to |
| 2 | 1 | 235-4645 Lip Type Seal | Do not lubricate. Install within 2 minutes after removal from shipping tube at slow speed rate. Use installation tool only. |
| 3 | 1 | 235-4541 Impeller | Lubricate the shaft with a thin film of clean engine oil before pressing the impeller onto the shaft. The end of the shaft must be flush with the face of the impeller |
| 4 | 1 | 229-5472 Bearing Locknut | Torque to |
| 5 | 1 | 259-4596 O-Ring Seal | Lubricate the bore lightly with P-80 or 5P-3975 Rubber Lubricant. |
| B | - | - | Distance between end of the pump housing to impeller shaft is |
| C | - | - | Install height of the seal assembly is |
Caterpillar Information System:
C175-16 and C175-20 Generator Set Engines Camshaft
C175-16 Marine Propulsion Engines Water Pump
C175-16 Marine Propulsion Engines Engine Oil Pan
C7 Petroleum Engine Grounding Stud - Inspect/Clean/Tighten
C7 Petroleum Engine Engine Valve Lash - Check
3516C Industrial Engine Engine Oil and Filter - Change
C13, C15, and C18 Tier 4 Final Engines Timing - Calibrate
3516C Industrial Engine Refill Capacities
C13, C15, and C18 Tier 4 Final Engines Cooling Fan - Calibrate
C9.3 Tier 4 Final Engines Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Final Engines ECM - Replace
C13, C15, and C18 Tier 4 Final Engines ECM Software - Install
C175-16 Locomotive Engine Flywheel
Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F} Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F}
C175-16 Marine Propulsion Engines Fuel Control - Test
3516B Generator Set Engines with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0718 - FMI 13
C175-16 Marine Propulsion Engines Fuel Priming Pump - Test
Product Identification Numbers (PIN) Location Guide Integrated Toolcarrier
3512C and 3516C Marine Auxiliary and Generator Set Engines Refill Capacities
2012/02/27 A New Improved Torque Converter Inlet Tube is Used with TH55 FT-E70 Petroleum Transmission {3101, 3103}
3512C and 3516C Marine Auxiliary Engines Electrical Connectors
C175-16 Marine Propulsion Engines Indicator Lamp - Test
3512B and 3512C Petroleum Generator Set Engines Configuration Parameters