Ignition Transformer
Show/hide table
Illustration 1 | g02711078 |
Show/hide table
Specification for 357-7767 Transformer | |||
Item | Qty | Part | Specification Description |
1 | 2 | 9X-6477 Screw | Lubricate the bore lightly with the fluid that is being sealed.
Torque to |
2 | 1 | 125-7038 Transformer Spring | The transformer spring must be assembled with positioning tab located directly above the transformer connector. |
3 | 1 | 259-2091 Transformer | Transformer and adapter (4) shall be permanently bonded at the threaded joint. |
5 | 1 | 135-2651 Seal | During assembly, ensure that the inside diameter of the seal is properly seated in the bottom of the groove. |
6 | 1 | 213-7449 Terminal As | Use a 132-8263 Spanner Wrench in order to tighten the terminal assembly.
Torque to |
7 | 1 | 213-7446 Insulator | Insulator must be pressed into the transformer assembly before the terminal assembly is installed. |
8 | 1 | 119-9443 O-Ring Seal | During each removal of the transformer, inspect the O-ring seal at the bottom of the extension. If the O-ring seal is dry or if the O-ring seal is cracked, replace the O-ring seal. |
Caterpillar Information System:
CG137-08 and CG137-12 Generator Sets Gas Engine Ignition
CG137-08 and CG137-12 Generator Sets Gas Pressure Regulator
2011/08/26 A New Cylinder Head Group and Tube Assembly Are Available for Certain C9 Marine Engines {1100, 1714}
2012/02/27 New Fuel Injector Lines Groups are Used for C175-16 Generator Set Engines {1252, 1254}
CG137-08 and CG137-12 Generator Sets Flywheel Housing
3000 Frame SR5 Electric Power Generation Winding - Test
Loose Bolts on Camshaft Idler Gear Shafts for C175 Engines{1206} Loose Bolts on Camshaft Idler Gear Shafts for C175 Engines{1206}
C15 Engines for Combat and Tactical Vehicles Engine Valve Lash - Inspect/Adjust
C1.5 and C2.2 Industrial Engines Fire Prevention and Explosion Prevention
3516C Generator Sets Fire Prevention and Explosion Prevention
CG137-08 and CG137-12 Generator Sets Crankshaft
3000 Frame SR5 Electric Power Generation Component Descriptions
2011/10/19 A New Product Link Registration/Activation Process Now Available For Product Link (PL) 522 and 523 {7606}
C15 Engines for Combat and Tactical Vehicles Cooling System - Check - Overheating
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Speed - Check
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258} NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
C15 Engines for Combat and Tactical Vehicles Cooling System
CG137-08 and CG137-12 Generator Sets Camshaft
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install - Alternate Air Starting Motor - TDI
2011/09/20 Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
3500C Marine Engines Refill Capacities
CG137-08 and CG137-12 Generator Sets Cylinder Head