CG137-08 and CG137-12 Generator Sets Caterpillar


Crankshaft

Usage:

CG137-08 FPL


Illustration 1g02709556

Table 1
Specification for 251-2301 Crankshaft Gp 
Item  Qty  Part  Specification Description 
4N-0684 Dowel  Maximum protrusion of dowel from the rear side of the crankshaft face is 8.4 mm (0.33 inch)
253-1752 Thrust Plate  Thickness of new thrust plate is 5.74 ± 0.04 mm (0.226 ± 0.002 inch)
After assembly into the cylinder block, crankshaft end play with new thrust plates is 0.10 to 0.60 mm (0.004 to 0.024 inch).
Thrust plates to be used on center main bearing only.
7S-5005 Dowel  Protrusion of dowel from the crankshaft surface is 4.1 ± 0.5 mm (0.16 ± 0.02 inch)

Caterpillar Information System:

3000 Frame SR5 Electric Power Generation Component Descriptions
3000 Frame SR5 Electric Power Generation General Information
3516C Generator Set Engines Pressure Sensor - Calibrate
3516C Generator Set Engines Prelubrication Pump Problem
3516C Generator Set Engines Oil Filter Differential Pressure Problem
3516C Generator Set Engines Fuel Pressure Is Low
3516C Generator Set Engines Exhaust Temperature Is High
2011/08/23 A New Electronic Hour Meter Is Now Used for Certain Marine Engines {7478}
C1.5 and C2.2 Industrial Engines Glow Plugs (ARD Combustion) - Replace
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
C32 Marine Engine Overhaul (Top End)
CG137-08 and CG137-12 Generator Sets Vibration Damper and Pulley
3516C Generator Sets Fire Prevention and Explosion Prevention
C1.5 and C2.2 Industrial Engines Fire Prevention and Explosion Prevention
C15 Engines for Combat and Tactical Vehicles Engine Valve Lash - Inspect/Adjust
Loose Bolts on Camshaft Idler Gear Shafts for C175 Engines{1206} Loose Bolts on Camshaft Idler Gear Shafts for C175 Engines{1206}
3000 Frame SR5 Electric Power Generation Winding - Test
CG137-08 and CG137-12 Generator Sets Flywheel Housing
2012/02/27 New Fuel Injector Lines Groups are Used for C175-16 Generator Set Engines {1252, 1254}
2011/08/26 A New Cylinder Head Group and Tube Assembly Are Available for Certain C9 Marine Engines {1100, 1714}
CG137-08 and CG137-12 Generator Sets Gas Pressure Regulator
CG137-08 and CG137-12 Generator Sets Gas Engine Ignition
CG137-08 and CG137-12 Generator Sets Ignition Transformer
2011/10/19 A New Product Link Registration/Activation Process Now Available For Product Link (PL) 522 and 523 {7606}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.