CG137-08 and CG137-12 Generator Sets Caterpillar


Gas Engine Ignition

Usage:

CG137-08 FPL


Illustration 1g06381589

Table 1
Specification for 361-9552 Gas Engine Ignition 
Item  Qty  Part  Specification Description 
12  437-4129 Ignition Transformer Gp  Before assembly, Lubricate the bore lightly with fluid being sealed. 
12  108-9656 Cable Strap  Strap the harness to the support rod on each valve cover.
For better tightening of cable strap, locate the tie-wrap strap head on back side of the clip. 
12  2N-2839 Spark Plug  Gap for spark plug is 0.645 ± 0.075 mm (0.0254 ± 0.0030 inch)
Tighten the spark plug to 35 to 40 N·m (26 to 30 lb ft).
117-3204 Support Rod  Before installation, remove all the labels from the support rod.
Install one support rod per valve cover. 
110-3888 Wiring Harness  Before installation, remove all the labels from harness assembly.
Apply red Loctite® 596 to the mating face of the harness connector and install within 10 minutes to avoid hardening.
Align the connector with notch in the topmost position. 
16  9X-2543 Screw  Torque to 0.4 ± 0.1 N.m (3.5 ± 0.9 lb in)

Caterpillar Information System:

CG137-08 and CG137-12 Generator Sets Gas Pressure Regulator
2011/08/26 A New Cylinder Head Group and Tube Assembly Are Available for Certain C9 Marine Engines {1100, 1714}
2012/02/27 New Fuel Injector Lines Groups are Used for C175-16 Generator Set Engines {1252, 1254}
CG137-08 and CG137-12 Generator Sets Flywheel Housing
3000 Frame SR5 Electric Power Generation Winding - Test
Loose Bolts on Camshaft Idler Gear Shafts for C175 Engines{1206} Loose Bolts on Camshaft Idler Gear Shafts for C175 Engines{1206}
C15 Engines for Combat and Tactical Vehicles Engine Valve Lash - Inspect/Adjust
C1.5 and C2.2 Industrial Engines Fire Prevention and Explosion Prevention
3516C Generator Sets Fire Prevention and Explosion Prevention
CG137-08 and CG137-12 Generator Sets Crankshaft
3000 Frame SR5 Electric Power Generation Component Descriptions
3000 Frame SR5 Electric Power Generation General Information
CG137-08 and CG137-12 Generator Sets Ignition Transformer
2011/10/19 A New Product Link Registration/Activation Process Now Available For Product Link (PL) 522 and 523 {7606}
C15 Engines for Combat and Tactical Vehicles Cooling System - Check - Overheating
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Speed - Check
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258} NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
C15 Engines for Combat and Tactical Vehicles Cooling System
CG137-08 and CG137-12 Generator Sets Camshaft
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install - Alternate Air Starting Motor - TDI
2011/09/20 Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
3500C Marine Engines Refill Capacities
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.