Camshaft
Show/hide table
| |
| Illustration 1 | g02711842 |
Show/hide table
| Specification for 353-9334 Camshaft Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 4N-0342 Plate | Thickness is Width of the groove in the new camshaft is |
| A | - | - | Diameter of bearing journal is |
Show/hide table
| |
| Illustration 2 | g02711843 |
Show/hide table
| Specification for 353-9334 Camshaft Gp | |||
| Item | Qty | Part | Specification Description |
| - | - | - | Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (C). 2. Measure the base circle (D). 3. Subtract the base circle (D) from the camshaft lobe height (C). The difference is the actual camshaft lobe lift. |
| B | - | - | Specified camshaft lobe lift for: |
| Inlet lobe is |
|||
| Exhaust lobe is |
|||
Caterpillar Information System:
C15 Engines for Combat and Tactical Vehicles Cooling System
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258} NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Speed - Check
C15 Engines for Combat and Tactical Vehicles Cooling System - Check - Overheating
2011/10/19 A New Product Link Registration/Activation Process Now Available For Product Link (PL) 522 and 523 {7606}
CG137-08 and CG137-12 Generator Sets Ignition Transformer
CG137-08 and CG137-12 Generator Sets Gas Engine Ignition
CG137-08 and CG137-12 Generator Sets Gas Pressure Regulator
2011/08/26 A New Cylinder Head Group and Tube Assembly Are Available for Certain C9 Marine Engines {1100, 1714}
2012/02/27 New Fuel Injector Lines Groups are Used for C175-16 Generator Set Engines {1252, 1254}
CG137-08 and CG137-12 Generator Sets Flywheel Housing
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install - Alternate Air Starting Motor - TDI
2011/09/20 Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
3500C Marine Engines Refill Capacities
CG137-08 and CG137-12 Generator Sets Cylinder Head
CG137-08 and CG137-12 Generator Sets Cylinder Head Valves
CG137-08 and CG137-12 Generator Sets Exhaust Bypass Valve
2011/11/10 Spacers have been Added to the Shaft Shoulder of the Console Support on Certain Cat Excavators {7324}
G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105} G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105}
2011/09/28 New Rocker Arm Assemblies Are Available for Certain C15 Truck Engines {1102, 1123}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Lead Connections
3512, 3508 and 3516 Generator Sets Refill Capacities