Exhaust Bypass Valve
Show/hide table
Illustration 1 | g02713114 |
Show/hide table
Specification for 113-0909 Exhaust Bypass and 342-6285 Exhaust Bypass | |||
Item | Qty | Part | Specification Description |
1 | 1 | 4J-4382 Pipe Plug | Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize. |
2 | 4 | 8T-1753 Taperlock Stud | Before assembly, lubricate the threads and bearing surface with Loctite C5A Copper Anti-Seize. |
3 | 2 | 7L-3195 High Temperature Bolt | Before assembly, lubricate the threads and bearing surface with Loctite C5A Copper Anti-Seize. |
4 | 3 | 5B-7890 Pipe Plug | Before assembly, lubricate the threads of the pipe plug with Loctite C5A Copper Anti-Seize. |
5 | 4 | 5P-2603 Taperlock Stud | Before assembly, lubricate the threads and bearing surface with Loctite C5A Copper Anti-Seize. |
6 | 4 | 3P-7019 Metal Seal | Before assembly, lubricate the bore with clean engine oil. |
Show/hide table
Illustration 2 | g02713115 |
Detail of area A |
Show/hide table
Specification for 113-0909 Exhaust Bypass and 342-6285 Exhaust Bypass | |||
Item | Qty | Part | Specification Description |
7 | 1 | 7S-7816 Locknut | Torque to |
8 | 5 | 7C-9721 Screw | Torque to |
9 | 1 | 6V-8801 Nut | Torque to |
Caterpillar Information System:
CG137-08 and CG137-12 Generator Sets Cylinder Head Valves
CG137-08 and CG137-12 Generator Sets Cylinder Head
3500C Marine Engines Refill Capacities
2011/09/20 Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install - Alternate Air Starting Motor - TDI
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install
CG137-08 and CG137-12 Generator Sets Camshaft
C15 Engines for Combat and Tactical Vehicles Cooling System
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258} NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Speed - Check
C15 Engines for Combat and Tactical Vehicles Cooling System - Check - Overheating
2011/11/10 Spacers have been Added to the Shaft Shoulder of the Console Support on Certain Cat Excavators {7324}
G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105} G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105}
2011/09/28 New Rocker Arm Assemblies Are Available for Certain C15 Truck Engines {1102, 1123}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Lead Connections
3512, 3508 and 3516 Generator Sets Refill Capacities
3500 Generator Sets Coolant (DEAC) - Change
3500 Generator Sets Coolant (ELC) - Change
349F and 352F Excavators Hydraulic System Automatic Travel Speed Control - Test
3500 Generator Sets Coolant Level - Check
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble
C27 Generator Set Control Panel - Inspect/Test